HP StorageWorks Ultrium 448 LTO 2 Tape Drive - Answered Questions & Fixed issues

you never actually asked question. is this a tape space issue, (compression not up to par) what? why not ask at HPE. its an enterprise system Business. why ask in the toy section here./. and not real HP here is real HP. (i have Proliant servers) https://www.hpe.com/us/en/support.html ask on the real HPE forum first. bet wise do that and NOT HERE. create an account (free) the look on the hpe forum here. see all those other wise users asking in the right place, yes. https://community.hpe.com/t5/forums/searchpage/tab/message?advanced=false&allow_punctuation=true&q=tape+Ultrium+448

Hi John, not sure from your description which light you refer to.But this sounds like your drive has either had a read / write issue - in which case you need to run a new cleaning tape through the unit and then retry using a brand new data tape - OR it has had a damaged tape loaded into it which has now broken the tape drive.If the drive has been broken then try contacting www.tape-drive-repair.com who can repair or replace it for you and also look at http://tape-drive-repair.com/tools-and-information/lto-media-inspection-guide/The guide will tell you how to inspect ypoour media for damage and prevent you from reloading a damaged tape which will break your drive again

Yes you can certainly replace a fan on the external case of your tape drive.These are not available from HP but if you go to www.tape-drive-repair.com , they can usually help with replacement external chassis for your unit or supply a fan for you.You can also try removing the fan yourself and searching for the correct fan using the fan details. These can often be bought from RS components / CPC Tandy etc but you will need to get the right size (using the centre of the mounting holes) as well as the right thickness of fan. you might also need to make sure you get the right voltage and the correct number of outputs from the fan (some require a tacho wire)Certainly this fan is required as the tape drives can get quite hot when they are working and should they get too hot (a common issue) then they will become unreliable.

You can download LTT from www.hp.com/support/tapetools

Stop all the backup services.
Run LTT firmware update and some test

here´s a manual

http://www.dectrader.com/docs/set3/emr_na-c00397852-1.pdf

You can download LTT from www.hp.com/support/tapetools

Stop your backup services and Ran some test

First try to double check your SCSI controller drivers and your drive firmware (With LTT)

Try a brand new tape fresh out the wrapper.

If that doesnt work make sure you are using the right drive in your backup software!

It sounds like a message often seen in windows backup where you have selected the wrong tape drive from the list and it just tells you "No compatible media found" when actually the drive listed isnt even connected to your system still

NO OS Stated, W10? or ? ive no idea all your system topology, what networks. sure sub net but what is it , consisting of what.??? vast choices. we use wired Gigalan here 1000 bits/sec. wired. every inch. all connected with GIGALAN high speed switches, with wifi , all you are doing is doomed to failure (1 day ok day2, not) i can list the top 100 reasons way, but will not. ill do a few..., , collisions with neighborhood, or noise. Channels are shared, and this is bad, in the concrete jungles. WIFI is RADIO, and will fail with noise, near by. RFI its called. google that. or wiki it. wifi is ok for chat ,email and whatsap. iffy on, skype... If WIFI is your mandate (bad) then move it to channel 10. i use wifi radar app and move to where the other guys are not.!!!+ if wired tell me are you using reserved IP in DHCP of this unstated router. do so now. make sure the media server is on a reserved IP . then setup shares. what are you serving audio video or both. can you see the files using the" my computer icon" , called windows Explorer? "this PC" in 10 now. just because you can ping it tells you only that the ping requests are honored there, and nothing else., it must have the shares all set correctly. next time tell the help the lay out of your system even post a system diagram. be amazing but , rare here.

HP X13-04657, is 2007 PC THOSE this PC has CCFL back lamp strip that is dead.Vista era PC, laptops. are hard to work with now, 17 years old.is this not a HP COMPAQ presario HP X13-04657 (wrong name!) sorry !became HP in 2002. so is HP but manuals are super hard to find now. that x13 is part of the microsoft license code vista. (so is distraction to what it is)the real name of the Laptop is and was Presario CQ61 laptop CQ61 the PC has bottom sticker that shows the real names of PCs.CQ61-219TU is real name of on CQ61, there area many different sub codes, and they are not all the same.CQ61-306AX this had CCFL (cold cathode florecent lamps) that love to fail 3 waysdead, blinks ,dime or yellow = white.was made until 2009 and evolved, to LED backlamps.-410 is CCFLI will answer for CCFL as those just love to fail,but the the test is so easynow the answer for ANY laptop this old. 2007 and older. black screen all the time, and BIOS screens dead, answers only me. here. remove the main battery (large) it simply snaps off the bottom.the power pack is next we run the PC on your power pack AC to DC it must make the screen glow with something, do not use the wrong pack as in mixed up with others.now the lap top seems on, even the fan blows, LED glowpoint a flash lamp at the screen ,dark' room , and of you see any kind of LCD data on the screenthe CCFL lamp below #1 is bad.this is phase 1 testing, as other things can fail too. The keyword below is Mercurythis tells me it is those pesky CCFL glow tubes. 2007 is the year some PC went to LED back lamps. yes I was correct the service manual I did find proves they made both lamp types

Question edited for clarity. Question translated to English. We only speak English on this North American website. https://www.google.com/search?q=hp+scanjet+8270+driver+windows+10

HP Scanjet 8270 Document Flatbed Scanner

Hewlett-Packard https://support.hp.com > ca-en > drivers > hp-scanjet-827... Download the latest drivers, firmware, and software for your HP Scanjet 8270 Document Flatbed Scanner ... drivers free of cost for Windows and Mac ... Windows 10 / ...

HP Scanjet 8270 Document Flatbed Scanner

Hewlett-Packard https://support.hp.com > ee-en > drivers > hp-scanjet-827... Download the latest drivers, firmware, and software for your HP Scanjet 8270 Document Flatbed Scanner. This is HP's official website to download the correct ...

HP Scanjet 8270 Document Flatbed Scanner drivers - Download

Softonic https://hp-scanjet-8270-document-flatbed-scanner-drivers.en.softonic.com Download the latest and official version of drivers for HP Scanjet 8270 Document Flatbed Scanner. This driver package is available for 32 and 64 bit PCs. It is ...

HP Scanjet 8270 Document Flatbed Scanner drivers - Free ...

Download.it https://hp-scanjet-8270-document-flatbed-scanner-drivers.en.download.it Download HP Scanjet 8270 Document Flatbed Scanner drivers varies-with-device. Software drivers for the 8270 flatbed model of the HP Scanjet printer. ..

This video shows you what to do if you forget your computer password:

This video shows you how to restore the BIOS in your computer:

You can follow the steps in this video to troubleshoot your battery:

1. Central Pin: In many laptop power supply connectors, especially those using the barrel-type connector, there's a central pin that carries the voltage (typically around 19 volts for most laptops) to power the device.
2. Voltage and Polarity: It's crucial to ensure that the voltage supplied by the power adapter matches the requirements of your laptop. Most laptops operate on 19 volts, but there are exceptions, so always double-check the specifications of your laptop and the power supply.
3. Polarity: Additionally, the polarity of the connector is important. The central pin typically carries positive voltage, while the outer sleeve of the connector is the ground (negative). Reversing polarity can damage your laptop, so make sure the connector is inserted correctly.
4. Safety: Always use the power adapter that came with your laptop or a compatible replacement from a reputable manufacturer. Using an incorrect or incompatible power adapter can not only damage your laptop but also pose safety hazards such as overheating or electrical fires.
5. Replacement: If you need to replace your laptop's power adapter, ensure that the new adapter provides the correct voltage, polarity, and wattage for your laptop model. It's often safer to purchase adapters from the laptop manufacturer or certified third-party suppliers to guarantee compatibility and safety.

If your laptop starts but the screen remains black, this video shows you the troubleshooting steps to follow:

The screws are T5 Torx security screws. You can get a set of these screwdrivers from any DIY Store or from Amazon. https://www.google.com/search?q=torx+screwdriver+set I have a set like this which has a handle and all the security screw bits. https://www.canadiantire.ca/en/pdp/mastercraft-33-pc-torx-screw-set-0544039p.0544039.html ..

Great questions, but two questions edited into one. The screws are T5 Torx security screws. You can get a set of these screwdrivers from any DIY Store or from Amazon. https://www.google.com/search?q=torx+screwdriver+set I have a set like this which has a handle and all the security screw bits. https://www.canadiantire.ca/en/pdp/mastercraft-33-pc-torx-screw-set-0544039p.0544039.html ..

If calibrating the battery didn't work for you you could try a hard reset of the battery:

Memory Max Maximum supported = 8GB

Here are some troubleshooting steps for when your computer won't turn on: