Top 20 HP ProLiant ML370 G4 Server - Page 7 Questions & Answers

As long as the OS is installed on the hdd you have installed, yes.

lost the PC (story?) and PC case lost did you?or bought a used mobo raw off of ebay or worse amazon?a used MOBO PULL. that code off mobo is the contract codesHP to Infineon?, it is not any kind of HP partnumber real.so for fun I did the reverse look up for you.usingHP Pavilion P6710f it is. top sticker on mobo tells what it is.go here, click countrytype P6710F and see lots of models that used this board world wide, only a real service tag number now lost tells exactly all things that were inside the PC new. https://partsurfer.hp.com/ P6710F prod.#BV530AAhttps://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=BV530AAwith this magic fact, we find the support page.https://support.hp.com/us-en/product/hp-pavilion-p6700-desktop-pc-series/5035348/model/5049539/manualsspechttps://support.hp.com/us-en/product/hp-pavilion-p6700-desktop-pc-series/5035348/model/5049539/document/c02628226came new 2011 with windows 7 or 8, support for w8 max. so it says. HP.com.last JUMPERShttps://support.hp.com/us-en/document/c02560084click all + bullets see the jumpers, cmos clear. etc.PW clear too.do we have bingo, here? all done the long hard way,reverse look ups'

there is no video card in this laptop, there is no card here. the hdd removeD never ever causeS power shut down, ever. in fact like that, bios will run for ever, on screen #1 if you tired. ever try ,:? bad hdd SURE IS NORMAL FOR RELIC xp or vista boot in 2008BUT IS MOOT UNTIL POWER IS CURED. OR OVERHEATING.YES we remove hdd to prove it is not shorted and overloading the power rails that is a valid test, always. 2008 GPU were bad, the chip, the Jan1,2007 USA mandate for no LEAD (Pb) caused vast PC to arrive then with dead GPU but the Op never once said the screen is dead. only power button vagueness, 2008 , 6530B THE REAL MOBO HERE. SEE GPU IS SOLDERED DOWN. CPU IS TIM grease, GPU IS THERMAL PAD NOT GREASE. THE RAD MUST BE CLEANED FIRST ON ALL LAPTOPSAND WILL BE PACKED IN LINT/dust/hair AFTER 14 YEARS, FOR SURE. it must be cleaned first.after huge battery removed. put a good battery in after PC runs perfectly on AC power only.

ask hp.com thiswe know they maker errors in their manuals here.what videos from whereoff hddoff ssdoff tumb driveoff NETFLIX SD (wifi to here sure)off NETFLIX 4K?No router told at all, so answers will be hard , super hard or impossible.. and how may users and of what (TV/PC,cell phone wifi)let me guess Ethenret runs great at Netflix.?what is your paid ISP speed?50Mb /s? (less)?upgrade to wifi 5 or 6 yet end to eND?Q2,NEW CPUASK HP. ONLY THERE SECRET LIST WORKS.g72 b63nrGO TO HP.COMCLICK SUPPORT + COMMUNITYASK THERE FOR THE SECRET CPU LIST.https://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/bd-p/Hardwarehere is the correct place, not internet rumors.Arrandale CPUhere they all are.https://ark.intel.com/content/www/us/en/ark/products/codename/32724/products-formerly-arrandale.htmlask HP which ones are supported, the BIOS must like it too.

redux 2: unified)No history at all, like how can 2006 printer just fail 2022. impossible. there is story but none told (bought it used 7 years ago)not told how LCD fails, we can not see if failand does, and not told exactly what it did.we learn later it can NOT SAVE ANY SETTINGsVirus = settings dead is what we learned.LCD settings will not save !BATTERY IS DEAD, NOT ONE EVER LASTED 16 YEARS.FACTS.:1: BATTERY IS DEAD.2: RESET MAGIC DOES NOT FIX BAD BATTERY (SURE)3: MAGIC, PRINT TEST PAGE FAILS PROVING PRINTER IS BAD, AND NOT SOFTWARE EVER FIXED A DEAD PRINTER.dead is dead, and hint #1 is LCD + setting + language will not SAVE.Hp Photosmart C5180, What is the Special Key Combo http://h10032.www1.hp.com/ctg/Manual/c00737535.pdfNOW WE know what infected means.?it means he LCD settings are dead. dead as a door nail , save settings fails hard.yes the manual showsspecial key press for master restand more key pair press for print test page that is dead.the test page works with NO PC or USB any data cables at all. so printer is dead onlyand not software.ANd test page is dead,due to all settings lostdue to , battery dead. all settings lostit can not even understand what language to print in as that is lost too.solvedrefr.bad coin cell. (how to get there video)https://youtu.be/JNiBZ0lHn7g?list=PLCCcBpjpBYbhYdsOmNYa9C0X7LXoeLGCw&t=209jpg of it 10x more clearhttps://i.ebayimg.com/images/i/331333687624-0-1/s-l1000.jpgone of the last C5180 running on earth.unless full service done but there are no new parts sold for it, so magic like that can not happen.yes paper, ink, and coin, yes yes yeshere is the official HP parts surfer list.https://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=Q8220Ano electronics sold and all else out of stockuse your product number to get correct listah a wireless kit is there and upgrade.same page Dec-31-2013 (a 7 year support life)all support ended 9 years agoonly used parts on Ebay,

As you have found the connection on the monitor itself, I'm unceratin why you ask where it is. It the HP documentation below does not help, perhaps one of the following videos will offer the solution you seek: https://support.hp.com/us-en/document/c01643091 https://www.youtube.com/watch?v=QUybgDbb6p8 https://www.youtube.com/watch?v=QUybgDbb6p8 https://www.youtube.com/watch?v=hL2L8ZvPeeU

2007 PC, made, new and now 15 years old. both batteries are bad. ! 1 down 1 to go? coin cell too is bad and can not BE IGNORED !; BIOS runs the charger chip, so if COIN cell CMOS DIES BIOS goes nuts and can not charge the battery properly. make sense? why change just 1 battery, that is what is odd read page 92 pdf https://www.manualslib.com/manual/273642/Hp-Pavilion-Hdx.html?page=82#manual

hi go to following link you will find https://www.manualslib.com/products/Hp-2310m-237811.html

no model pC told, not even desk nor laptops told.then name Pav is used on both for decadesDing ding, this post is now GENERIC::!! warning.new means zero to me, ever.The PC has service tag find it an tell the HP model and product codes first.then we can talk turkey. facts.NO OS told if new is window 10 or 11.many stores sell old PCs even 10 years old as new.and in fine print shows it is a REFURB what I call dust off PC'sthe cause is huge, but here are macro reasons less1-PC is corrupted, infected. in vast ways really.2-PC has too much junk in startup files.3-PC HDD bad. (failing fast and self corrupting ALL)4 - hdd full? (some have small HDD and fill up fast)learn to use MS windows,task manager yet,?note I guessed wild windows here.launch TMthen click processes tab.then click CPU column top to make it show the worst ones in %those are the problem there (offending apps)HOW TO: run TM.all at once click control + alt + DEL key right bottom.then at blue screen click TASK MANAGER.THEN CLICK MEMORY TAb SEE WHAT APPS ARE HOGS.THEN CLICK STARTUP TAB AND GET RID OF THINGS NOT NEEDED THERE (A SKILL THAT IS)show yours in a photo?SOME USED PC THE SELLER DOES NOT EVEN TELL WHAT MODEL IT IS AT ALL ,HIDING THE 10+ YEAR AGE. (evil)EBAY,AMAZON WORSE, AND WALMART. HP 380 RELICS.?show me where you bought it, the URL sales page and I will tell you what you bought.if you like used PCs a Dell is besthere is the wiki showing 2 things, models and year.a Dell optical 3020MT , or newer is best. (affordable)see them here, series 4 or higher only2010 or newer or h77 chipset or higher. 3020mt.https://en.wikipedia.org/wiki/Dell_OptiPlex#Series_5or last answer, TAKE it back and exchange the new PC.?or tell what PC you have,maker.model.and get non generic answers

shorter answer, ? 2005 PC , XP day 1 new, is it XP now? NO OS told, you want to run, no clues. XP? 1-HP ended support. long ago ,hp.com see they did. ALL GONE.! 2-MS PnP plug and play , may work but not OS told at all. how sad. 3-GOOGLING this for a fact will get your PC infected, for sure if running XP to W7, not told. so lets focus only on 2 bad things NIC Ethernet that makes #2 above dead. this PC is a relic, and but I will lockup the NIC for you. what is actually there, (HP, hates true specs but I can do it) french PC , I'm USA so might get this wrong, ours can be different. can I presume PC is not dead and runs XP? what must be does is get the driver on a 2PC (nic) move it to the M7000 to get the driver, it must match the PC and the OS. fully. lets discover what nic chip is there now. (not wifi, I refuse wifi) it is the

• Chipset Type Intel P965 Express

oops 965 has no NIC that means it has ethernet card. or has other chip Ethernet there, dedicated and is HP secret this, not in the spec. that leaves 2 choices, add one or find the ID's in device manger. NO OS TOLD I give up. xp has no support now, so adding new NC card will fail but and old XP nic card will work if running virus magnet XP. in device manager, in page control panel. do this click on NIC and right click properties. these magic PnP codes,(5) tells what NIC is really there with the code we can you all operating systems support this chip XP yes, w10- mostly not. 2005 is 16 years ago but I'd have to look.

all I have are questions, and list of tests. One VRM saw a short and shut down as it must, to not burn up.VRM job (partly) is to act as a FUSE. (pure electronics fuse)you must find what is shorted, for sure it is a module of any kind inside, if all USB port are unplugged,even USB cables can short, some system shut down like that, others just the VBUS chip to it shuts downnot sure if you have POE ethernet ports there?> nah not there, power over ethernet. so can not short outside.that new MOBO was it preloaded with RAM and CPU or DEPOPULATED ALL THINGS.

Try: 1.Continually press the "F2" key on your keyboard as the computer powers up to open the BIOS menu when you see the Hewlett-Packard (HP) logo on your computer screen. 2. Make your desired changes in BIOS, using the arrow keys to navigate through the menu options. 3.Press the "F10" key to save your changes and exit the BIOS menu.

Use a biro .

Strip down the laptop, de-solder the jack, and replace it. If you are lucky, you may be able resold the old one if a contact has broken. Or you replace the whole motherboard.

Visit the HP Support Website: Go to the official HP support website at HP Customer Support. Enter Your Product Details: Enter the product name "Media Center M7000" and locate the specific model or product number. In your case, you've provided the system number RF893AA, which is also known as the product number. Locate Drivers and Downloads: Once you've identified your product, navigate to the "Software, Drivers, and Firmware" section. Choose Your Operating System: Select your operating system (e.g., Windows) and its version (e.g., Windows 7, 8, 10). Find and Download Drivers: Look for the drivers related to your PC's components, such as graphics, audio, network, etc. Download the required drivers to your computer. Install the Drivers: After downloading the drivers, run the installation files and follow the on-screen instructions to install them. Restart Your PC: After the installation is complete, restart your PC to apply the changes. If you face difficulties finding the specific drivers for your model or if your PC is quite old and HP no longer provides drivers for the chosen operating system, you may need to consider using default drivers that come with the operating system or upgrading your operating system.

Hello, please give some details so I can give some accurate ideias

Will you try this https://play.google.com/store/apps/details?id=com.magicjack&hl=en_US&gl=US ? and give use your comeback

If you are using win 10 force close it twice with the power button , turn it on as soon as it beeps use the power button to switch it off , do this two times , this should bring up the repair windows repair screen and give the option of removing the update .

The battery is shorted out

Great reply from our Computer Guru Larry. Let's put it down here, because it is now solved :>)

• all monitors made for 2 decades to that , and buy law in USA> called Energy Star compliance. NO PC told nor OS told w can not guess PC nor what OS you run. not ever. make and model PC not told nor if using VGA/DVI/HDMI or DP connections. wow 14 years and finally fails. (amazing luck there and 99% of 2007 monitors are now dead, 8hr/day ,365. the answer box 1 , is you can not do that. in the monitor. by law. hard coded. here see why./? see sleep loop inside MON firmware, yes there it is .https://pcdied.com/BIOS/e173flow1.jpg All monitors go to sleep for 2 reasons, PC went dead (by law) or PC actual is in sleep mode. all PC sold are coded (settings) to do that by law, OOBE (out of the box experience) by law. so if using windows are you? yes, then click CP control panel, the power setting an turn off sleep to the MON or learn to google?? or ask any kid ,they know for sure. windows 10 (but gee 2007 is XP or VistA) google how to turn off sleep in windows. that power menu , control every thing in the PC that can sleep. USB ports, Nic cards, Monitor GPU ports , HDD and more, and all your choice on 2nd day owned. on desk top we just end sleep by hitting space bar (easy close wide key) or wiggle the mouse. or if set right in same place, the power button ends sleep pushed fast. on some old PCs, letting USB sleep, makes mouse and keyboard dead. (painful) mouse usb, fails. to unsleep in device manager,, go to mouse then right click properties on it. tab power management , allow this device to wake the computes. and do not allow hibernate mode, in power settings, it things can get ugly fast now the ELEMENT in the room. the PC came with XP I bet, 90% did and if upgraded and the PC maker does not allow, w7 or w8 or w10 at all then the drivers are bad. and bad drivers LOVE TO FAIL FOR Sleep. NO PC told no OS told hp 27,is what? nada see why here https://www.hp.com/us-en/shop/plp/access... the rear of a MON shows a tag with true model a desktop has 6 sides, one side has the tag, even bottom side. not told that. the monitor tag will show model and p/n or sku.# and nnnnnnnn#ABA the ABA is the true product number that also shows and tells options in it DAY1 new. like how many ports there are and what kinds of ports. and more. example (sorry googe will not let me see one year of 2007 monitors or Id guess better (grin) HP 27" 3UA74AA#ABA (LED,) so is newer, your is CCFL lamps, 2007 most are. PC 2007 , HP Compaq dc7800??? W2007 MONITOR? I never saw a 27" LCD monitor in 2007 so... and google fails me to find it. 100s of 27" HP monitors, yours not told, nor cable type used (VGA):?
Anonymous Jul 29, 2021 short answer turn off sleep in PC. if that fails the GPU card drivers are wrong, corrupted or not for you current unstated OS