Top 20 Xerox Phaser 6120/YN Laser Printer Questions & Answers

what problem were you having that you chose to "reset" the printer ?Tallon41

Xerox Phaser... • 240 views • 0 helpful votes

Hi there.

These toners normally has a metal contact that tells the printer that the toner is there or how much toner is left. Make sure that these contacts are clean and dry and free from any dirt or inks. Use a dry cloth to clean it.

Let me know if you need further assistance.

Thank you for using Fixya!

Xerox Phaser... • 162 views • 0 helpful votes

Anything over 100 dollars for this unit is too much. You can purchase a new one for $450, there is no need to spend the ridiculous amount on the fuser.

Xerox Phaser... • 58 views • 0 helpful votes

Hi there clean the paper receiver roller and then reset the copier and try. Let me know whats happened. If not done then i am sure the sensor is damaged and you need to replace that.

Xerox Phaser... • 82 views • 0 helpful votes

check ur all toner cartridges first whether it is ok or not

Xerox Phaser... • 50 views • 0 helpful votes

The firmware update didn't install correctly or was corrupted when you downloaded it. Download the update again and go through the install process again, that should resolve the issue.

Xerox Phaser... • 248 views • 0 helpful votes

To change your toner first turn off the printer and unplug it from the power outlet. Then, lift the toner door. Carefully grap the toner cartridge from both ends and lift it up. Do not shake the toner as you may get dirty. Then take the new toner cartridge, remove any plastic covers and insert it in the printer. Close the toner door and start your pritner.

Xerox Phaser... • 213 views • 0 helpful votes

Problem on fuser unite.When it hole surface block waste toner then arise this problem.Clean all surface and wast toner then solve your problem.

Xerox Phaser... • 344 views • 1 helpful votes

Have you checked your paper tray guided to be certain they are properly set?

Xerox Phaser... • 168 views • 0 helpful votes

Have you tried changing the transfer roller because alot of the times that causes that error. Good luck

Xerox Phaser... • 1,192 views • 1 helpful votes

fuser Temp printer error problem.please give me the solution.

Xerox Phaser... • 3,105 views • 8 helpful votes

Hi rmcday: Here your problem. The imaging unit creates the image using an electro-photo process. The imaging unit consists of the following: ■ An OPC Drum ■ Waste Toner Assembly ■ Charge Roller Assembly 9.0 Consumables, Routine Maintenance Items and Options Item Life based on 5% coverage Part No. Replaceable by Black Standard Toner Cartridge Black High capacity 3,000 7,000 106R00679 106R00684 User replaceable Cyan Standard Toner Cartridge Cyan High capacity 2,000 5,000 106R00676 106R00680 User replaceable Yellow Standard Toner Cartridge Yellow High capacity 2,000 5,000 106R00678 106R00682 User replaceable Magenta Standard Toner Cartridge Magenta High capacity 2,000 5,000 106R00677 106R00681 User replaceable Imaging Unit 50,000 images 108R00593 User replaceable Transfer Belt 50,000 images 108R00594 User replaceable 500-Sheet Feeder N/A 119650600 Waste Toner Cartridge 3,000 to 5,000 pages (color 5%) 106R00683 User replaceable. Your imaging unit may have exeeded it life of 50,000 pages and will need to be replaced. Hope this helps

Xerox Phaser... • 2,025 views • 1 helpful votes

look inside and right of toner
It's the pin tha connect toner with machine.clean it

Xerox Phaser... • 339 views • 2 helpful votes

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} We had purchase our Xerox Phaser 6120 printer in 2007.
Last one month is past we can’t printing our staff. We made complain regarding the same to Sunshine Service they told us that the sensor is gone, and they say its every difficult to get it, but they are trying to get it. Also we have spent on baying new toners for the same which is become useless now.

Pls. reply to [email protected]

Xerox Phaser... • 249 views • 0 helpful votes

Hi. probably they are corrent. You better show the machine to some other proffessional too and get their opinion rather than wasting money. The best thing to do is to contact xerox and tell them there is a problem with a sensor and what should be done bout it. This way you wont have to go thru a middle man and your work gets done much faster.

Xerox Phaser... • 119 views • 0 helpful votes

hello my friend, If you want to change or remove then you can remove the toner cart from your printer by opening the printer cover once the printer cover is open then remove the toner cart. Thanks 

Xerox Phaser... • 110 views • 0 helpful votes

Unfortunetly, you will have to reset the printer. Using the control panel go to the default setting and scroll to reset to factory settings. Then select yes and that should take care of it. If not, then in the rear of the printer under the cover, upper left side you will find the memory button battery. Remove the battery, unplug the unit, and turn it on for about a minute. Turn it off and put it back together and you should be ok. Good luck.

Xerox Phaser... • 1,447 views • 0 helpful votes

50 -100 pages.

Xerox Phaser... • 153 views • 0 helpful votes

Most likely just one of the pick fingers has popped out in the fuser and is stuck in between the rollers.
You can remove the fuser and look, they are somewhat pointed fingers and are spring loaded. They make contact with the rollers and often times pop off. You want to look at the condition of the heat roller also. It is a teflon coated aluminum roller. Just check to see if the teflon coating is still shiney.
Looking at the printers if you want to replace it, I would go with the 6180. Don't go with the solid ink color, Extremely expensive to operate.

Xerox Phaser... • 329 views • 0 helpful votes

what singal black toner use only i no want color
toner use

Xerox Phaser... • 409 views • 0 helpful votes

Not finding what you are looking for?
Xerox Phaser 6120/YN Laser Printer Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6259 Answers

Eric Engel

Level 2 Expert

124 Answers


Level 3 Expert

1997 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Phaser Xerox

  • Phaser Xerox

Most Popular Question

xerox printer problem fuser temp

  • Office Equipment & Supplies