Hi rmcday: Here your problem. The imaging unit creates the image using an electro-photo process. The imaging unit consists of the following: ■ An OPC Drum ■ Waste Toner Assembly ■ Charge Roller Assembly 9.0 Consumables, Routine Maintenance Items and Options Item Life based on 5% coverage Part No. Replaceable by Black Standard Toner Cartridge Black High capacity 3,000 7,000 106R00679 106R00684 User replaceable Cyan Standard Toner Cartridge Cyan High capacity 2,000 5,000 106R00676 106R00680 User replaceable Yellow Standard Toner Cartridge Yellow High capacity 2,000 5,000 106R00678 106R00682 User replaceable Magenta Standard Toner Cartridge Magenta High capacity 2,000 5,000 106R00677 106R00681 User replaceable Imaging Unit 50,000 images 108R00593 User replaceable Transfer Belt 50,000 images 108R00594 User replaceable 500-Sheet Feeder N/A 119650600 Waste Toner Cartridge 3,000 to 5,000 pages (color 5%) 106R00683 User replaceable. Your imaging unit may have exeeded it life of 50,000 pages and will need to be replaced. Hope this helps

Read full answer

Xerox Phaser... • Answered on May 22, 2012

2 Answers

The error 17 toner carousel

Be the first to answer

Xerox Phaser... • Posted on Aug 26, 2011

0 Answers

Missing yellow cartridge Error

Be the first to answer

Xerox Phaser... • Posted on Jul 04, 2011

0 Answers

Model: Xerox Phaser 6120. We

Hi there.

These toners normally has a metal contact that tells the printer that the toner is there or how much toner is left. Make sure that these contacts are clean and dry and free from any dirt or inks. Use a dry cloth to clean it.

Let me know if you need further assistance.

Thank you for using Fixya!

Read full answer

Xerox Phaser... • Answered on May 29, 2011

3 Answers

IT WILL COST US $394.00 TO FIX OUR XEROX PHASER

Anything over 100 dollars for this unit is too much. You can purchase a new one for $450, there is no need to spend the ridiculous amount on the fuser.

Read full answer

Xerox Phaser... • Answered on Jan 30, 2011

1 Answer

Prints on half of paper and burred whats is it

check ur all toner cartridges first whether it is ok or not

Read full answer

Xerox Phaser... • Answered on Jan 17, 2011

1 Answer

Will not pick up paper

Hi there clean the paper receiver roller and then reset the copier and try. Let me know whats happened. If not done then i am sure the sensor is damaged and you need to replace that.

Read full answer

Xerox Phaser... • Answered on Jan 11, 2011

1 Answer

I tried to update the

The firmware update didn't install correctly or was corrupted when you downloaded it. Download the update again and go through the install process again, that should resolve the issue.

Read full answer

Xerox Phaser... • Answered on Oct 29, 2010

1 Answer

Cyan Toner Cartridge Missing Error

Be the first to answer

Xerox Phaser... • Posted on Jul 29, 2010

0 Answers

Changing black toner

Hi,
To change your toner first turn off the printer and unplug it from the power outlet. Then, lift the toner door. Carefully grap the toner cartridge from both ends and lift it up. Do not shake the toner as you may get dirty. Then take the new toner cartridge, remove any plastic covers and insert it in the printer. Close the toner door and start your pritner.

Read full answer

Xerox Phaser... • Answered on Feb 08, 2010

1 Answer

Hi--my Xerox 6120 phaser has started chopping off

Have you checked your paper tray guided to be certain they are properly set?

Read full answer

Xerox Phaser... • Answered on Jan 12, 2010

1 Answer

XEROX PRINTER PROBLEM FUSER TEMP.

Problem on fuser unite.When it hole surface block waste toner then arise this problem.Clean all surface and wast toner then solve your problem.

Read full answer

Xerox Phaser... • Answered on Jan 10, 2010

1 Answer

Transfer roller 14 error phaser 6120

Have you tried changing the transfer roller because alot of the times that causes that error. Good luck

Read full answer

Xerox Phaser... • Answered on Oct 29, 2009

1 Answer

Ink

On the fuser (under the top cover), there are 2 green levers with envelopes on them. The one on the right is probably flipped up. The purpose of these levers is to decrease pressure on the paper when printing on envelopes which are 2 or 3 layers of paper. It reduces the wrinkling that occurs when printing envelopes on most laser printers. Flip that lever down and you're golden.

Read full answer

Xerox Phaser... • Answered on Aug 04, 2009

1 Answer