The error is displayed.
Can somebody tell me the key sequence to get into maintence mode
on the Brother 115c. and reset the purge counter.
Posted by fido2 on
Pls refer below to clear the "Unable to Clean" error:
1. Enter MAINTENANCE MODE: Press MENU, MONO START 4x on ARROW UP within 2-3 sec
2. Using the ARROW UP botton, press botton and wait for the ff #:
a. 8 then press SET
b. 0 then press SET
3. Using the MONO START, just press until the word "PURGE XXXXX" comes out
4. Using the ARROW UP botton, press botton and wait for the ff #:
a. 2 then press SET
b. 7 then press SET
c. 8 then press SET
d. 3 then press SET
e. Press Stop/Exit
(This is to reset the purge counter)
5. Using the ARROW UP botton, press botton and wait for the ff # to appear:
a. 0 then press SET
b. 1 then press SET (to reset unit)
c. 9 then press SET
d. 9 then press SET (to exit maintenance mode)
If after this procedure you still encounter problem, see your service center
Hope this will solve your problem "unable to clean".
Posted on Feb 19, 2009
,im looking for the driver downLoad of the brother dcp-115c for my computer windows xp 32..i couldn't find any installer on the search area..
,please help me with my prob..
Posted by jhoyzee... on
firstly my printer cleans itself for a long time and starts to print normally. suddenly makes strange noises, after 1 page says "unable to print. See troubleshooting and routine maintenance chapter in user's guide." and stops to print. i cant on/off.
i read you instructions for finding error. i says "machine error 36"
Posted by ganyz on
Machine error 36
**Head/carriage unit travel error***
Try to find any obstacles on the travel path of the head/carriage unit. If you cannot find, next steps are:
- Replace the carriage PCB.
- Replace the head/carriage unit.
- Replace the CR encoder strip.
- Replace the carriage motor.
- Replace the main PCB.
- Replace the power supply PCB.
- Replace the maintenance unit.
Posted on Nov 14, 2008
my printer is brother DCP115C'' UNABLE TO CLEAN error code 50''
Posted by hannie... on
Machine error 50 is a error in Purge unit.You can't fix it by yourself and your printer need service.In most case the cost of repair is more than cost of new printer.
Posted on Nov 03, 2009
My Brother printer says: Unable to init. 43. According Brother that means: The internal temperature is too high/ low.
It is standing in the living room so that should not be a problem. Any suggestion?
Posted by aanmeldadr... on
carriage PCB on print head or main PCB defective
Posted on Jun 21, 2010
Brother DCP 115C displays unable to init message tried the trouble shooter in manual still says it what should i do
Posted by Anonymous... on
press menu then start b/k-copy (mono) then fortimes arrow up button quickly after another. machine will switch to mainteance mode. press start bk copy.
What two digit error code does the machine display?
Post here again.
Posted on Mar 09, 2008
hi, eventually my printer display appeared unable to clean, what should i do about it?
Posted by sashimi on
you need a new waist ink absorber box from a service partner which can be found at brother homepage of you country.
After replacing the box you have to do a reset.
search error 46 or unable to clean here in the forum. it has been written many times.
Posted on May 05, 2008
The error I'm seeing is-Print Unable 70 See troubleshooting and maintenance in User's Manual, but there is nothing in the User's Guide to help. I have had my Brother all-in-one printer for less than a week and I just replaced the black ink cartrige. Can someone tell me what Print Unable 70 means?
Posted by alizbuck on
Here is some great PRINTER solution by Some FIXYA EXPERT.
Get any kinds of PRINTER solution from bellow.
» Lexmark Printer Solution
» Epson Printer Solution
» Brother Printer Solution
» Dell Printer Solution
» Canon Printer Solution
» HP Printer Solution
» Kodak Printer Solution
Posted on Sep 07, 2009
I have replaced by ink reservoir/sponge but the reading is stil saying Error 46, can anyone please tell me how to reset the printer.
Posted by Simonpalme... on
if u replace ink manually, the priter may no longer work. bcoz bubbles will damage the cartage. thak you
Posted on Apr 24, 2008
printer says it unable to clean 46 and I can't even shutdown printer it needs to be unplug to turn it off.
Posted by rodzen on
Dcp-150C, clean unable 46
Posted on Jan 12, 2011
507 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: