Top 20 OKI C5800dn Laser Printer Questions & Answers

The toner sensor (43131601) is located on the right side of the sub-chassis that holds the Drum/ Image units. It may be defective.

Item, Inc.

OKI C5800dn... | 301 views | 2 helpful votes

Your indication regarding the 100% does not necessarily indicate a damaged chip (sensor).
Many chips do not work by actually sensing the toner but by usage or other tricks.
We cannot be sure about what happened but replacing the drum and affected items
should solve the problem. Needed parts may be found at

OKI C5800dn... | 910 views | 0 helpful votes

You need to do s head clean.
This could take 2 or 3 goes but should fix it you will find head clean in the maintenance settings.
It eats the ink so only do as you need.
let me know how it goes.
Regards Craig

OKI C Office... | 67 views | 0 helpful votes

If you printer has an additional memory card fitted then remove it (powered off of course) and turn on and see what happens. If the fatal error is still there then with the age of the machine (getting on in years) it is better to replace it as the error refers to the cpu in the control board and that's expensive on older machines to replace.

OKI C Office... | 219 views | 0 helpful votes

remove the toner/drums and transfer belt. on the right side is the reg rollers. there is a black arm and sensor the detects the paper weight etc there. that will control the paper sense errors, make sure it moves freeley, clear of paper, dust etc.

OKI C Office... | 834 views | 0 helpful votes

your drum cylinder (opc) or dev roller needs to be replaced

OKI C Office... | 335 views | 0 helpful votes

1.Click on Start and go to control panel
2. Go to programs and then uninstall a program.
3. Find and uninstall your printer software.
4. Restart your system and install your printer.
5. Restart your system.
6. Live Happily ever after !

OKI C Office... | 213 views | 0 helpful votes

remove drum units and clean optical sensors located at the back end of he drum slots and clean corresponding reflective plates on drum units

OKI C Office... | 238 views | 0 helpful votes

the best soloution is to replace the unit with a brand new one as reset fuses are difficult to work with on fuser units but if you search the internet you might be able to find a reset kit from alibaba or amazon

OKI C Office... | 199 views | 0 helpful votes

Amber's solution worked on an oki c5150 as well as on her 5500.
At first, I got into other menus and did not see what she'd described. I cancelled out, then re-ran her procedure following its steps EXACTLY... At the very end, I may have seen one additional message - "EXECUTE" - which I "entered" to launch the process. Printer now works while I find instructions on how to replace "just the drum".

The OEM drum assembly is very easy to change but costs about $125. I found (on Universal Ink & Toner) a drum-only replacement for $30, but there was no instruction sheet with it. This solution has allowed me to keep working while I figure out how to install the new drum. Print quality was excellent right up until the manufacturer's internal counter shut printing down. Quality remains excellent after applying the above solution.


OKI C Office... | 468 views | 0 helpful votes

1 fuser unit or
2 transfer belt

OKI C Office... | 66 views | 0 helpful votes

You have a possible problem with the secondary card; harware problem. Cost of fixing it vs. buy another printer.

OKI C Office... | 128 views | 0 helpful votes

one ore more color ink cartridge are bad

OKI C Office... | 264 views | 0 helpful votes

replace with correct Original manufacturer toner cartridge.

OKI C Office... | 109 views | 0 helpful votes


OKI C Office... | 971 views | 0 helpful votes

probably one of colour cartridges (usually not original from OKI) is updetting the printers logic Swap they around (even if you have to use old cartridges), find offending one and replace.

OKI C Office... | 583 views | 0 helpful votes

Press the OPEN button and open the top cover
Take out the image drum unit, place it on a flat surface, and cover it with black paper.
Remove any jammed paper in the direction of the arrow.
Remove in the direction of the arrow any paper jammed the inside front of the printer.
Pull out toward the front of the printer any paper jammed at the fuser unit, with the fuser unit lever (blue) left turned in the direction of the arrow.
Install the image drum unit in the printer so as to situate the K toner cartridge toward the front of the printer.
Close the top cover.

***If you need any technical help on printer then you can reach at here.

OKI C Office... | 129 views | 0 helpful votes

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.

OKI C Office... | 98 views | 0 helpful votes

Does not work on OKI C830. Get error message such as toner level error.

OKI C Office... | 2,402 views | 0 helpful votes

Not finding what you are looking for?
OKI C5800dn Laser Printer Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top OKI Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers


Level 3 Expert

4369 Answers

Cindy Wells

Level 3 Expert

6196 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • C OKI

Most Popular Question

oki c5800 printer sensor malfunction

  • Office Equipment & Supplies