20 Most Recent Whirlpool Ultimate Care II GSW9650LW Top Load Washer - Page 4 Questions & Answers


Whirlpool would be a possible source.

Whirlpool... | Answered on Nov 30, 2020


The F33 error means that the washer control unit didn't get the expected response from the drain pump drive during a self-test (before starting the washer cycle). This is usually a wiring issue. Unplug the washer and drain out any water in the unit. Remove the clothing and pull the washer out so that you can reach the access panel. Take a look at the wiring between the drain pump and the CCU (control unit) DP2 connector. Make sure that all of the wiring harnesses are connected. Look for any broken wires or ones that are detached from the wiring harness. With an multimeter, check for continuity in these wires. If there are any broken wires, replace the wiring (Main Harness).

If the wiring is okay, check if the drain pump filter is clogged with a foreign object. Disassemble the drain pump and check if the impeller is intact and on its shaft. Replace the pump if the impeller is damaged. Reconnect the power to the washer and check if the error recurs.

I hope this helps. If you add a comment with the model number, I may be able to provide more information on the parts.

Cindy Wells

Whirlpool... | Answered on Nov 23, 2020


The washtub suspension of your washer probably needs an overhaul.

Whirlpool... | Answered on Nov 18, 2020


Probably the dispenser is filling to be flushed during the subsequent wash cycle.

Whirlpool... | Answered on Nov 11, 2020


This message means that a water sensor in the base of the washer has been tripped. This usually means that there is a leak in the washer. Sometimes, the sensor is faulty. Turn off the washer. Turn of the incoming water lines at the shut off valve and unplug the washer. Tip the washer forward to allow any collected water to leave the area under the unit. Check the tub where the drain hose connects and incoming water hoses for leaks. Check for any problems with the drain pump or the hoses to the pump and drain. Replace or repair these items. You might just need new washers or hoses. These steps apply if there is water in the base of the machine and the tub is dry. If the water flows into the washer when you plug in the machine and turn the water shut-off valves to open, replace the inlet valves that has failed in the open position.

If the washer tub has water in it and there is no water in the base from a previous leak, check the water leak sensor for a short. Check the wiring between this sensor and then control board. Check the triac for the drain pump and the pressure switch and level sensor for this pump. If the pressure switch and level sensor are okay, then replace the controller.

Some of the parts for the AWM 6122 are available here: https://www.4whirlpool.co.uk/awm-6122-857061212203/catalogue.pl?path=600169&model_ref=13246411 . I hope this helps.

Cindy Wells

Whirlpool... | Answered on Oct 16, 2020


on display panel might have to replace whole display board

Whirlpool... | Answered on Sep 14, 2020


In all probability this could be a program malfunction. You can try to run in manual mode that is selecting one function only in one time. If it still persists then requires some module or board change.

Whirlpool... | Answered on Sep 07, 2020


Have a look at this on youtube these guys have a lot of videos on their youtube account for this problem, hope it helps.

https://youtu.be/wUL5Wb1T71c

Whirlpool... | Answered on Aug 22, 2020


Pull out unplug and leave for a few minutes then switch back on. That’s what we done and it worked.

Whirlpool... | Answered on Jul 13, 2020


At the end of the wash/rinse programmes the drum would turn slowly while the pump removes the majority of the water and when the tub is virtually empty the drum will begin building speed over time until the spin speed is reached. The pump remains running until the end of the spin. That is how things usually go.

An automatic washer doesn't drain - it is pumped out!

Your description suggests either there is something wrong with the pump or programmer.

Whirlpool... | Answered on Jun 30, 2020


Order your highly medicated cannabis strain and cannabist related accessories in our site. 100% discreet Delivery
Contact info
WHATSAPP: +16615328526
text/Call +16615328526
[email protected]
site: originalweedshop.com
Welcome to the Original Weed online shop! We strive to offer you the best and widest selection of countercultural products. From 13 different cannabis strains, vaporizers, glass bongs and smoking accessories to grow kits, extraction kits and cleaning equipment. We have everything at the best price! We only deal with authentic objects ... no imitations or imitations! Browse our product categories and keep an eye out for new items as we become America's best online store!
Since 1997, The original weed shop located in Stanford Ave, Los Angeles has been steadily earning the reputation of being UNITED STATES Premier online weed dispensary!
We were the first, and remain the best head shop in the area. We helped pave the way for this industry to be where it is today and are here to take it into the future. Our brand new online original weed shop is the next step in our evolution.

https://originalweedshop.com/product/buy-pink-lady-online/
https://originalweedshop.com/product/buy-super-lemon-haze-online/
https://originalweedshop.com/product/buy-ice-cream-cake-strain-online/
https://originalweedshop.com/product/face-mints/
https://originalweedshop.com/product/buy-og-kush-online/
https://originalwhttps://originalweedshop.com/product/buy-zkittles-strain-online-min-order-1-oz/eedshop.com/product/buy-deadhead-og-kush-online/
https://originalweedshop.com/product/buy-royal-king-kush-online/
https://originalweedshop.com/product/buy-pink-budder-wax-online-min-order1-ounce/
https://originalweedshop.com/product/honeycomb-clearmin-order-15/
https://originalweedshop.com/product/ginger-dank-nugs/
https://originalweedshop.com/product/buy-viper-kush-online/
https://originalweedshop.com/product/moby-dick/
https://originalweedshop.com/product/buy-cantaloupe-haze-online/
https://originalweedshop.com/product/buy-skywalker-oghttps://originalweedshop.com/product/candyland/-0nline/
https://originalweedshop.com/product/buy-skywalker-og-0nline/
https://originalweedshop.com/product/buy-ak-47-online/
https://originalweedshop.com/product/buy-royal-king-kush-online/
https://originalweedshop.com/product/buy-ice-cream-cake-online/
https://originalweedshop.com/product/buy-guava-cake-online/
https://originalweedshop.com/product/buy-zombie-cookies-online/
https://originalweedshop.com/product/sour-tangie/
https://originalweedshop.com/product/buy-sweet-tooth-online/
https://originalweedshop.com/product/buy-black-widow-online/
https://originalweedshop.com/product/buy-comatose-online/
https://originalweedshop.com/product/buy-rockstar-og-online/

Why Shop at ORIGINAL WEED SHOP?
Awesome selection, fast shipping, 24/7 customer service, all available in your pajamas. Or whatever you're wearing; we don't even want to know, TBH.
There are definitely differences between shopping at a local brick and mortar smoke shop versus shopping at an online headshop like ours.
Contact info
WHATSAPP: +16615328526
text/Call +16615328526
[email protected]
site: originalweedshop.com

Whirlpool... | Answered on Jun 22, 2020


Error code F30 in my case was generated when the plastic link bar forced the cam over a small plastic pin stop. The cam was trapped on the wrong side of this small pin and could not be rotated by the linkage. Removing the linkage and repositioning the cam solved the problem. Why it jumped the "fence" in the first place is a mystery. Time will tell if it reoccurs.

Whirlpool... | Answered on Jun 22, 2020


The big question is does everything run smooth without a load inside?
If nothing is bent, worn, has free play or is unevenly clagged, it should run like a Cadillac when empty.
If it doesn't, nothing you can do will make it run smoothly with a load. If there is a vibration when empty and no reason can be detected, perhaps the drum has gathered sediment, limescale or soap residue (unevenly clagged) more on one outside of the drum than the other and made the drum imbalanced.

A load of laundry is inherently unbalanced and some machines are more sensitive to being overloaded or underloaded than others and that is why manufacturers tend to stress the desirability of weighing the load.
The initial build up of speed allows the laundry load to shift until it achieves an almost balanced position so it can run to maximum speed relatively smoothly. Those initial out-of-balance forces can be severe and that is why there is usually a fairly sophisticated suspension system that is designed to cope with this with rubber blocks, weights, springs and even hydraulic shock absorbers.

If no other reason can be found for the problem it is almost certainly a worn or damaged suspension system...

Whirlpool... | Answered on Jun 17, 2020


Hi i have many options of how you can unlock the machine but am giving you this video and see how you can make it practical

Whirlpool... | Answered on Jun 17, 2020


Your question isn't complete, and expert Steve asked you for more information to help.

In case you were searching for a free manual, the following link is one:

https://www.manualslib.com/products/Whirlpool-Gt1195sh-422335.html

Whirlpool... | Answered on Jun 08, 2020


1. Unplug the washer for 1 minute from the electrical outlet.
2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. ...
3.The motor has now been reset and is ready for you to start a cycle.

Whirlpool... | Answered on May 13, 2020

Not finding what you are looking for?
Whirlpool Ultimate Care II GSW9650LW Top Load Washer Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Washing Machines

  • Whirlpool Washing Machines

Most Popular Question

disassemble agitator

  • Washing Machines
Loading...