This Setup/BIOS can be reached by striking a certain key during boot; for most machines, it is the Delete/Del key.
Restart your you will see a certain key to press usually the F2 or Delete key
press and hold that key to enter set up.
Once in BIOS/CMOS using the arrow keys navigate to information about all your hardware (hard drive floppy CD-ROM etc) If you don't know how to find it, look in anything resembling Basic or General settings.
If this information is not listed there, look around in the different settings being careful not to change anything until you do find it.
Since BIOS's differ from PC to PC it is impossible to say what heading to find the information on.to access any of the settings select the name press enter
Once you reach the settings for the drives go down to the Floppy and select it.
If you are trying to get Windows to see it enable the Floppy drive.
If you are trying to get Windows to forget it disable it.
if you change any settings by mistake
you can always load failsafe or optimised defaults
press escape then F10 to save to cmos to restart
hope it helps
Teac Computers & Internet • Uploaded on Oct 06, 2013
17 questions posted
Usually answered in minutes!
41 Questions
39 Questions
22 Questions
17 Questions
17 Questions