Whirlpool 15.2 cu. ft. / 430 liter Upright Freezer EV150FXKQ - Answered Questions & Fixed issues
I am hearing a fan sound . but inside freezer very
Normal
0
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Hi,
Many times a freezer and/or refrigerator
do not work right because of a dirty condenser coil...there are also many other
things that can go wrong.
If you are hearing a clicking or buzzing then check out the
last two tips.
If your refrigerator is running but warm, then…
Check out this tip that I wrote about that... it is a great place to start
trouble shooting your unit...and something that you can do rather then calling
a repair person to do a simple thing for you...
Refrigerator Condenser Coil Cleaning Refrigerator Repair
Refrigerator Troubleshooting Refrigerator Compressor
Refrigerator Compressor Start Capacitor and Start Relay
heatman101
Freezer will not stop running -- has been on for
The thermostat has a thick, bendy, copper or aluminium (non electric) conduction wire that goes from it, to physically connect to the internal metal casing.
When that lead becomes disconnected, the motor can just run, as the thermostat can't get a reading within the range it is designed to look for and control. It just hunts permanently for a reading.
Maybe this is not it, but see if anything came loose when you were storing the machine. If tempted to investigate areas that hold live 115V, always resist doing that and use a licenced electrician.
Water
You have to unblocked your drain of the fridge & will work after.
Francois
Need to add freon
- if you are tapping into a sealed system, then you use the larger of the two copper lines coming out of the side of the compressor (this is the low pressure line, the compressor pulls from this side).
- clean off the copper tubing with some fine sandpaper before installing your tap.
- it is very easy to over fill a system with freon, so i would recommend pulling down the system to -30 psi and holding for at least 20 minutes. then add a known amount of freon to the system.
- let it run for a while, it will take a little time to get the temperatures down.
Ice maker
look for a on off switch on the ice maker it is soimetimes hard to find im looking at 1 right now its on the right side in front of the ice maker good luck
Not finding what you are looking for?