20 Most Recent Magic (2004PROSONGPORTABLEKARAOK) Shelf System - Page 3 Questions & Answers

Assuming that your machine isn't too old to use the song chips, do you have any chips which came with it? If they still work, then it's unlikely to be the player. Most likely that it simply can't read the new ones. If you got them from a reputable dealer, then I suggest that you seek their advice as they should know about them better than anyone. If not, then there are sites for dealers on the internet, whom I'm sure would be glad to advise you. Sorry that I can't help more and good luck :-)

You cannot pay MagicJack bills on the FixYa website; you must go to their website.

Where is the broken pin located? My suggestion is to buy another Mic. In my experience no matter how you fix it you'll end up getting another problem. Like a Buzz or the mic will start cutting out. Sometimes it'll effect the frequency.

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..