20 Most Recent Comfort Zone CZ-530 Compact Heater - Page 6 Questions & Answers

here you go http://www.globalindustrial.com/site/images/universal/product_extras/CZ9009.pdf

We do not sell parts here.

Change the system selector to cool. Press hold if applicable and then set desired set point. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Electric Heater Thermostat Were you successful in adding the external thermostat?

The top light is coming on but the fan isn't working

This indicates a power fault inside the actual heater. Have you tried unplugging the heater, letting it sit for a good 2 minutes, and replugging it back in? If the problem persists you will unfortunately need a repair. Please let me know if you need more information on this. You can also contact comfort zone, the manufacturer, located in Canada, at 780-420-6572.

Thanks so much for the question,

Tim

Take it back, any attempt to repair will void the warranty

Make sure the unit is clean. Especially, the blower wheel. If that doesn't resolve your error code then follow these instructions. http://screencast.com/t/RoXS239ndAhF Look that over please, you can clean the blower wheel at the red arrow, jumper the two switches at the blue arrows as *brief tests only* just to see if the unit runs and begins to heat with the jumpers in place. If it runs, replace the item that failed open. If it does not run, the control module, Item 5 marked with green is most likely bad and needs to be replaced.