20 Most Recent Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker - Page 8 Questions & Answers

check at the back of refrigerator were water line comes in see if there have eany hole or check your freezer may be it (ajar)

Kenmore Elite... | Answered on Dec 31, 2013

its most likely a frozen water tank. try and clean the coils by the compressor and then make sure the temps for refr are set around 38. it might need to be warmed up inside the refr section. you can tell if its too cold by the vege's if lettuce, carrots and celery are crispy, then you might need to clean the coils.

Kenmore Elite... | Answered on Dec 31, 2013

If your not sure about the cooling yet I would say it's an electrical problem around the relay if u keep shutting it off the overload will kick in and well just buy a new one for all Yuri our gonna be paying im a student with 2 months to graduate just saying

Kenmore Elite... | Answered on Dec 11, 2013

Since the freezer is icing up there could be many different problems a blockage or a problem with the defrost or timer of the unit if u greeting unit number is should be on inside of the door or back by the condenser best bet from what I see is get a tech to fix it they will find all those numbers that u need

Kenmore Elite... | Answered on Dec 11, 2013

Have pressure taps installed, & check the refrigerant... these refrigerators have a critical charge (meaning not a lot of refrigerant to make them work) So whoever puts gauges on it, make sure they purge their hose while screwing the hose on to the new pressure tap so there is no loss of refrigerant & no air gets into the system. It sounds to me like it is low on refrigerant.

Kenmore Elite... | Answered on Dec 10, 2013

there is recall for this problem fr this model - call 8006597026

Kenmore Elite... | Answered on Nov 19, 2013

sounds like a deftost problem. check the defrost limit switch and heating element, if good than replace the defrost timer or control.

Kenmore Elite... | Answered on Nov 16, 2013

This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.


The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.&^#

Kenmore Elite... | Answered on Nov 13, 2013

I would guess you have just caused a build up of ice to block the air way, which normally takes cold air into the fridge. manually defrost (unplug and wait until the ice goes away) then restart and it should be fine

Kenmore Elite... | Answered on Nov 11, 2013

Not finding what you are looking for?
Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker Logo

1,245 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts


Level 3 Expert

3063 Answers

Dale Copeland
Dale Copeland

Level 2 Expert

109 Answers

Cindy Wells

Level 3 Expert

6185 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Refrigerators

  • Kenmore Refrigerators

Most Popular Question

water leaking into freezer

  • Refrigerators