20 Most Recent Panasonic KX-TG6700 Phone - Page 7 Questions & Answers

The KX-TGA401C handset works with the KX-TG401x, KX-TG403X and KX-TG651x phone systems among others. If you have the appropriate base, see the suggestions below. Does your handset read Ringer Off? Try setting the ringer volume. With the phone system in standby (no calls in or out for any handset), press Menu. Navigate using the Up/Down arrows to Initial Settings. Press Menu/OK. Navigate to Ringer Settings and press OK. Press OK again to enter the Ringer Volume sub-menu. Use the Up/Down arrows to set the ringer volume and press OK to save. Press Off to exit the menu system. The other possibility is that the handset is not registered to the base. Note: only 6 handsets can be registered to the base. If you previously registered 6 handsets, you need to deregister some of them. To register the handset, hold the handset near the base since you will need to press buttons on both. Press Menu on the handset and navigate to and enter Initial Settings. Navigate to Registration and press OK. Navigate to HS Registration and press OK. On the base, press and hold the Locator button for 5 seconds and the registration tone sounds. Press OK on the handset you are trying to register. If all the registered handsets start ringing, you triggered the Locate handset function. Press the Locator button again. Then do the press and hold step again. Only press OK on the handset when you hear the registration tone. You can find the manual for the KX-TG4011 here: https://shop.panasonic.com/support-only/KX-TG4011N.html . The direct link to the manual is https://ftp.panasonic.com/telephone/om/kx-tg4011_mul_om.pdf . See page 21 for the directions to set the ringer volume. I hope this helps. Cindy Wells (You can't register a handset to an incompatible base. The communication protocols don't work.)

Not sure what you mean 'configure the system to play on external device', (music on hold?) but here is your manual for both units. https://www.teledynamics.com/tdresources/bd33f39d-c9ba-4150-b610-a50b9a86e114.pdf ..

bin it and get a new one

To erase a number from your blocked calls list;

1. Press [MENU] [#] [2] [1] [7]
2. Press the [?] or the [?] button to select the telephone number that you want to erase.
3. Press [ERASE]
4. Press the [?] or the [?] button to select [YES]
5. Press [SELECT]
6. Press [OFF]

May 5, 2017

How do I unblock a number on a kx-tgea20 handset ...

https://www.justanswer.com > ... > Phone Problems

NO CLUE IF PANASONIC DOES NOT KNOW

I doubt you can. However if you log into your phone service you likely will be able to find the number in the call list.

Manufacturer site or online search

If you are UK based, number display is an addon to your land line phone service.

Ok head over to https://www.justanswer.com/phone-systems/6psar-panasonic-cordless-phones-stopped-working-no-dial-tone.html they will help you. Please mark this as helpful and follow me.

Talk to your phone provider as methods vary.

No, the KX-TG68XX phones do not work during a power failure. See page 12 of the user manual available on the product support page: https://www.panasonic.com/middleeast/en/support/product-archive/telephones-home-security/telephone/cordless/kx-tg6822.html . The current link to the manual is http://www.panasonic.ae/EN/Manuals/KX-TG6822.pdf . There are some cordless phones that allow the base to be powered by a handset. I've seen this with some AT&T cordless phone systems but do not remember any Panasonic models with all cordless handsets with the feature. A base with a corded handset will work without power for basic calls. Panasonic has a few models with the corded/cordless combination. I hope this helps. Cindy Wells

Could you have the Do Not Disturb feature engaged? Pick up your handset and press * 7 1 . Next press 0 (for all calls), 1 (for outside calls) or 2 (for intercom calls). Press 0 to cancel the do not disturb. Hang up when you hear the dial tone. There is also a call forwarding option that could be engaged. Again press * 7 1 . Press 0 to cancel any current forwarding option. You can find more about these features in the Quick Reference Guide available from Panasonic, https://www.panasonic.com/nz/support/product-archives/product-archives-business/unified-communications/business-phones/kx-dt343.html . The current link to the guide is https://www.panasonic.com/content/dam/Panasonic/support_manual/Telephone_Equipment/English/KX-DT343_KX-DT346_Quick_Reference_Guide.pdf . I hope this helps. Cindy Wells

Page 20 and onwards of the manual https://headsetplus.com/PDF/KXTS4300.pdf ..

Yes, it will remove all the blocked numbers

Try the help here. I trust it has a battery and is fully charged? https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00d8zYqmdoZ8nDPyr_YnklpmrP55g%3A1608425877540&ei=laHeX96yIIS7ggfH1LewDg&q=panasonic+kx+tga402+register+handset ..

It may be enabled, but normally you have to pay for it. Page 54 of the manual. It is automatic. Using Caller ID service Important: This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details. https://help.panasonic.ca/viewing/ALL/KX-TG9581/OI/TG9581_PNQX6371ZA/TG9581_PNQX6371ZA.pdf /..

You could try new battery but looks like speaker in headset failed or maybe there is mute switch? It may not be economical to repair.

Request the manual from Panasonic.

How to set date & time for panasonic KX-T7730 Propietary Telephon for more information visit us www.panasonic.jayaperkasa.com/date-time-panasonic-kx-tes824/

Request a cable tech to check phone service. No dial tone could be their problem