Lucent 2-Line Answering Phone - Answered Questions & Fixed issues

AVG Login Support -Anti-Virus Guard(AVG) is an antivirus software that provides protection to thousands of businesses against viruses, malware, ransomware, adware, trojans, and other threats. It provides complete security and safety to confidential data, emails, files, networks, and PC devices from cyberthreats. For AVG login, it is important to create an account. http://my-avg-login.com

When you push the line where the call is parked, you should already have the reciever in your hand. If you need to put the call on speaker and you have the reciever in hand, just push the speaker button.

not sure if this site will help or not as I don't have this phone system, but maybe you can make sense of it. Best of luck. http://www.tek-tips.com/viewthread.cfm?qid=1587630

turn off voice mail unless they are gone,what if they are hurt and takes them 10 rings??

Sounds like either you have do-not-disturb activated, or you have call-forward-all to voice mail set. You should have call-forward-no-answer turned on but it's easy to enter wrong code. Find a list of codes for your system and see if its one of those.

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when people call while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when people call while you're already on the phone. Please contact your telephone company for instructions on accessing their phone system.

press # longer

Hi,

With that issue, since you are in a quiet room and you are still hearing loud static noise in the background, there could be a problem with the wiring inside the phone that needs to be checked. And, make sure that you are not near any electronic device like Television, Radio or Refrigerator because those appliance and alike are causing static noise because of their frequency.

Cheers!

Hi - Unless your phone is really different, handset cords are universal, they are just four pin narrower RJ11 cables.


They are available wherever they sell phone extension cords, anywhere from Walmart to your chain drugstore (I'm talking about the US here, other locations may not apply) and certainly any electronics store.

Good Luck and Thanks for using Fix Ya.

Mikeywaf

If the processor sits in a 2 or 5 slot carrier, double check that the card is seated firmly in its slot. There's a plastic clip on the bottom of the card that keeps it locked into place and sometimes it comes loose. When you lose dial tone, check the lights on the face of the cards. You could have one card causing the rest to fail or just not secure.

If that doesn't fix it, it's probably time for a repair technician or start swapping card positions. You could start with pulling everything but the Processor and see if the trouble goes away, then add cards into the system.

Carl

I see your problem has been up for a few days and it appears that noone has answered?I cannot see other peoples recommendations,only your replies,and I see none.Hence my name,I can try.I have a good knowledge of system designs and will have a go at it.I see many pick and choose helpers and it kind of stinks.I have found a downloadable manual from a site I often use and there are about 20 different models of the Merlin Legend.Please let me know your model # and I will use the manual to see what does what.Also,TTR=Time To React?Thanks,Greg

What type of voicemail system?

Either no power from the electrical outlet, or the power supply in the phone system is damaged. Sometimes there is a fuse in the phone system that can be replaced. You probably don't have to replace the entine system. Also, you may be able to simply unplug, then plug the AC power back in. Then wait a few minutes for the system to load back up.

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

I think it depends on the phone system, but here to use intercom you press the line button above conference and then the numbers71

Yes, the bottom left buttons. SA RING, SA VOICE...

SA = System Access

Which lucent system is this?

This has to be done from ext 10 or 11
Press Feature 00
Left intercom twice
#101
and
#103

Cheers
Dont forget to rate.

Magix is discontinued product. Suggesting upgrading to IPOffice.
Then you will be able to see if carrier is the real problem.