20 Most Recent
One For All URC4110 Remote Control - Page 6 Questions & Answers
I need some codes for my one for all urc-3220 i
I can not find a list of codes for you how ever i can tell you what you need to do to do a scan to find the codes to your tv, vcr, ect.
note: not all devices are compatible with this remote. some of the newer blue rays dvd players as well as some of the dvr-recorders may not work as well.
NOTE 2: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH+, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching
Codes for magnovox tv
THERE ARE SEVERAL, 1004,1006,1008,1019,1036,1041,1044,1059,1062,1089,1102,1103 hOPE ONE OF THESE WORK, i AM TRYING TO SET UP MY RECEIVER ( BELL eXPRESS ) WITH MY (ONE FOR ALL REMOTE ) AND FORGOT HOW TO DO IT, DO YOU?
1. Turn on a your TV
2. On the remote control,press a device key (i.e. TV) once ). Press and hold SET
until the LED blinks twice, then release SET
3. Enter the first four-digit code for your component (0765). If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try entering the same code again.
For more advice and troubleshooting, download the URC4110 User Manual with all codes from here:
Can you please let me know the make and model no.of your device once again so that i can give you a download link to the manual.You have specified Sanyo as the make i also need the model no.
URC 3220 REMOTE
just try to program the remote by hitting code search on the remote and then continuously hit the power button until the tv turns off and then cut it back on and the tv should be programmed, good luck! make sure that you press and hold the code search button until the light comes on and then the power button.
I have a ONE FOR
het guys i need help smart series magnavox tv, also i have uni romo ,i want to know if any one know what is a cod? please help
What do i do about the v guide & how can i get it off??
MY TV BRAND NAME IS APEX MODEL # APT2702 & I HAVE THIS BLOCK THAT COMES UP WHENEVER
YOU TRY TO LOOK AT CARTOONS ON ANY STATION. IT READS AS
FOLLOW>>>>BLOCK DUE TO V GUIDE , RATING TV - Y 7-FV. PLEASE
HELP ME GET THIS OFF MY TV !!!
Not finding what you are looking for?