20 Most Recent
Nokia 3230 Cellular Phone - Page 2 Questions & Answers
Please unlock key for smart movie 4.15 my imei no
If you have bought the smart movie software, you can request for a registration code from here:
http://www.lonelycatgames.com/?app=smartmovie
If you have not bought the software yet, you can buy it from the same link as well.
Am sorry but piracy is not supported on fixya.
Phone start-up failed. contact the retailer
1.Check the device's battery level for at least two bars of strength. 2.If the battery level is low, charge the battery. 3.If the issue is not resolved, remove the back cover. 4.Remove the battery. 5.Wait 10 seconds. 6.Press and hold the W key. 7.While pressing down the W key, re-insert the battery. •The device restarts and after approximately 15 seconds, the 'Recovery' screen appears•Release the power button but *continue holding the home button*, for another 30 seconds.StepThanks
Joystick and keypad run loose or out of control
There are two board on 3230 first main board(engine) 2nd front board that contains camera,display(LCD) ,joy stick,keypad menu, etc.So to fix the problem are change your front board.Good luck.
Forgot password for my nokia3230
If you have forgot your password, You can do a master reset to your mobile. this would restore your phone with default factory settings. You can get the master reset code from any Nokia priority dealer.
10/30/2012 12:54:35 AM •
Nokia 3230...
•
Answered
on Oct 30, 2012
My Nokia software version very
Connect your handset with the pc suite, and select update software.the pc suite will search the internet for the latest software for your handset, if available, and will install it in your handset.
My nokia 3230 can not start how to got my contact numbers
Check your battery voltage and see if the adapter shows the charge, if the phone does not switch on or does not indicate any display then Do not attempt unless if you can take an opinion and estimate with the Nokia care center. The memory on the SIM can be transferred but the ones within the phone memory could be the issue.
Not finding what you are looking for?