20 Most Recent
RCA RCR311B Remote Control - Page 9 Questions & Answers
NEED CODES FOR GE
The codes are ..1000,1002,1004,1017,1050,1052,1078,1086,1098,1120,1132,1197,1207,
Dont know how to install it
Well first you have to know the code for the item you want to control.
then it goes something like this
select item ( TV1 for TV) then press SET
a light comes on and remains steady
enter code (known)( or listed in the Remotes book of instructions and codes) for the brand of TV selected( say 129) The light goes out. Press SET check by turning TV on/off. If it worked then you are finished. If not try the next code listed and follow the same sequence.
Pleaseate my help++++Thanks for using FIXYA
Need codes to program a Curtis Mathes television
try these codes they should work or onbe of them should!
Cu tis Mathes 0 0 4 7 ,0 7 4 7 ,1 1 4 7 ,1 3 4 7 ,0 0 5 4 ,0 1 5 4 ,
0 0 5 1 ,0 4 5 1 ,0 0 9 3 ,0 0 6 0 ,0 0 3 0 ,0 0 5 6 ,
0 1 4 5 ,0 0 1 6 ,0 1 6 6 ,0 4 6 6 ,0 0 3 9
Please rate my help++++Thanks for using FIXYA
RCA Universal Remote Code Entry
RCA Universal Remote Code Entry
Models RCR312W - RCR311BN - RCR311BIN
RCR311SN - RCR311STN
Would you like help entering the code to program your RCA Universal Remote? You can look up the codes for your remote
on this list.Here are the steps to enter the programming code into your RCA Universal Remote:
- Manually turn on the device you want to control.
- Find the Code List. Locate the section for the type of device you would like to control and find your brand in that section. Write down the code(s).
- Press and hold the device key you want to program. The on/off key light comes on.
- While holding the device key, use your other hand to enter the first five digit code for your brand from the list. The on/off key light goes off after the first digit.
- When finished entering the code, keep holding down the device key and look at the on/off key light. If the light is on, you have successfully programmed your remote. If the light blinks four times and turned off, you have entered a code number that is not in the code lists or have missed a step in the code procedure. Try the previous step again.
I hope that helps.
RCA Universal Remote Code List
RCA Universal Remote Code ListModels RCR312W - RCR311BN - RCR311BIN
RCR311SN - RCR311STN
Would like to program your RCA Universal Remote, but have lost your code list?
The RCA RCR311B code list
can be downloaded here.
I hope that helps.
RCA Universal Remote Code Search
RCA Universal Remote Code SearchModels RCR312W - RCR311BN - RCR311BIN
RCR311SN - RCR311STN
To setup your RCA Universal Remote Control with your TV or other devices, you can perform a code search. A code search tries to turn your set off with different brands' remote control codes until it finds one that works with your set.
Here are the steps for an RCA Universal Remote Control Code Search:
- Turn on the device you would like to control.
- Press and hold the device key (TV for example).
- While holding the TV key, use your other hand to press and hold the ON/OFF key.
- Wait until the ON/OFF key light comes on and stays on, then release both keys.
- Point the remote at the front of the TV and press PLAY.
- Wait 6 seconds while the remote sends a batch of 10 codes to your TV. If your device turned off, go ahead to the next step. If the device did not turn off, press play again and wait 6 seconds again.
- When your device turns off, press the REVERSE key on the remote and wait 2 seconds. If the device turns back on, press STOP and your remote is now successfully programmed for controlling that device. If the device does not turn back on, keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP.
I hope that helps.
Not finding what you are looking for?