20 Most Recent Logitech Harmony 785 LCD Remote Control Questions & Answers

After forcing my open, I found two screws more. Located at each side of the "activity" button - hidden beneath a the class covering the lcd-panel and framing keys. It is attached with double-sided tape. Rip it of - and your remote will look much better than mine...

Try pressing down on the remote, and wiggling it around. It's just that the pins are not making contact I suspect.

If pressing down helps, you can fasten it on with a elasitc band or something so that it keeps charging. Also, if it is still under warranty, I woul advise contacting Logitech's wonderful support team to get replaced.

Hope that helps!

update the firmware on the remote to get it out of safe mode and working again.

- connect the remote to your computer and launch the software
- click downloads at the top of the screen
- click firmware
- update the remote

if the firmware didnt fix it then it's a hardware issue. I would call their wonderful support team to get it replaced if you are still in warranty.

Here is another post that describes how to test to see if your IR emitters are working. In addition, it steps you through the process of replacing the emitters on the Harmony 880. Although you have a different model, you may be able to pick up a few tips from this article. Good luck!

http://hubpages.com/hub/HowToFixaLogitechHarmony880Remote

You will need to completely exit out of the Harmony software and re-launch it. To do this:
1. Quit the Harmony software
2. For Windows base PC's, right click on the Harmony icon from the system tray and click on Exit
3. For Mac, quit the software by clicking on Logitech Harmony Remote Software menu at the top of the screen and then clicking on Quit 4. Logitech Harmony Remote Software
5. Open the Harmony Remote Software

You should now be able to login.

First does your TV have a remote control? If it does then you have to change the output in there.If you have a VCR try using that if not then you can buy a switch at Radioshack.

I believe Logitech do not sell that part. If your device is under warranty, you can request an RMA. See here.

or else, you could try contacting Logitech support through email. Or you colud call the Harmony helpdesk at +1 866-291-1505
Monday - Friday: 9am - 10pm EST
Saturday - Sunday: 10am - 5:30pm EST

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

• "FixYa!" - The solution provides great advice on how to solve the problem.
• "Helpful" - The solution provides useful leads that helps solve the problem.
• "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
• "Inappropriate" - The solution has absolutely nothing to do with the problem.

Thank you for using FIXYA!

IrishDruid

No remote code for universal exists, you must use the logitech remote

Observe these instructions to connect your wireless Logitech PS2 controller to the receiver :-

1. Verify that the PlayStation 2 console is connected to the receiver.
2. Switch on the PlayStation 2.
3. Replace the controller's batteries.
4. For roughly 2 seconds, press and hold the receiver's sync button.
5. Press and hold the controller's X button for 5 seconds.
6. To verify a connection to the receiver, the controller LED should flash rapidly.

Try the following if the controller won't connect :-

• Double-check the placement of the batteries.
• Experiment with various batteries.
• Bring the controller up to eye level with the receiver. Try rebooting your PlayStation 2.

Try getting help from Logitech customer service if you're still having issues attaching the controller . Here are some extra pointers :-

• Verify that no other controller is currently using the receiver.
• Verify that no other wireless devices are present that could interfere with the connection.
• You might need to utilise an adaptor to connect the receiver if you're using a PS2 Slim.

The Logitech Z-340 control pod or a compatible controller can be found in a few different places. Here are a few options:

1. Logitech website: You can check the Logitech website to see if they still carry the control pod or compatible controller for the Z-340.
2. Online retailers: You can check online retailers such as Amazon, eBay, and Best Buy to see if they have the control pod or compatible controller in stock.
3. Specialized Electronic retailers: Some specialized electronic retailers like B&H, Newegg, and Fry's may have the control pod or compatible controller.
4. Local electronics stores: You can check local electronics stores in your area to see if they have the control pod or compatible controller in stock.
5. Second-hand marketplaces: You can also try checking second-hand marketplaces like Craigslist, Facebook Marketplace, and OfferUp to see if someone is selling a used control pod or compatible controller.

It's important to note that, if you decide to go for a non-Logitech controller, you should make sure it's compatible with your Logitech Z-340. And it's best to check the compatibility before buying the controller.

I'm sorry to hear that your Logitech 610 remote is stuck in safe mode. Here are a few steps you can try to try to resolve the issue: 1. Make sure you are using new, high-quality batteries. 2. Try resetting the remote by removing the batteries, pressing all of the buttons, and then reinserting the batteries. 3. If the issue persists, try connecting the remote to the Logitech Harmony software on your computer using the supplied USB cable. This will allow you to access more advanced troubleshooting options. I hope this helps! Let me know if you have any other questions or if there is anything else I can do to assist you.

Take the batteries out for 5 minutes and refit them.