Top 20 Linksys WPSM54G Print Server Questions & Answers

It looks that you would like to install drivers for Linksys WPSM54G.Please write to us with the answer of the following question.1) Do you have the driver installation disk with you? 2) Did you try to install the driver? 3) Did you get any error while installing it? Linksys WPSM54G is not compatible with Windows 8. You can check for the compatibility of any device or software from the Windows Compatibility Center. Please refer to the link given below. http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Linksys%2BWPSM54G&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14 In Windows 8 you can install software in compatibility mode with previous version of Windows. Please refer to the steps given in the link below under the section "Apply a compatibility mode" http://windows.microsoft.com/en-IN/windows-8/get-apps-devices-working I hope your issue gets resolved by now, please write if you still face any issue.

Hi could you tell what is the main Router it should be compatible with your main router to get the IP address then you can install and share the printer over the network should you need any help please contact me on my website http://computernetworksupportindubai.com/

Sorry I am not sure I understood your question. Do you mean that the printer prints everything else except those coming from the print server?

go into the control panel and add a wireless printer, it should detect it on the network.

if this doesnt work try going on the website and locate the driver

Driver for Epson Stylus CX5500 Printer
Please visit the above link from Epson Official Support and downloads. Select the Operating System you have on you Computer and click search to download the latest drivers.

Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

Check the firewall of your OS (Operating system) if it is enable disable it To find it go to start locate control panel open it then locate security center under the security you will see window security then you fined firewall then put it off. and try the linksys again. and make sure you don't create users for your system and don't passworded it.

Dear gbp7292, to access the admíns CP on this system yuou may try some of these "default" user and password combinations:

User System Password Manager
User Admin password 0000
User empty password 01234

If this still doesn't works, try doing a hard reset. To do this you will need to hold the reset button for 30+ seconds. After that, you'll have to reconfigure everithing.

Here is the link for your device:
http://homesupport.cisco.com/en-us/wireless/lbc/WPSM54G?referrer=www.linksysbycisco.com

win 7 has some problems with networking equipment. there is a method for installing the wpsm54 on vista and win 7. go to this link it has a good clear set of directions. good luck, aokcomputer

http://www.ehow.com/how_5396340_set-vista-vista-windows-linux.html

hi

thank you for using Fxiya

go to folowing link you will find complet stup for Linksys printserver

http://www.ehow.com/how_5396340_set-vista-vista-windows-linux.html

Hi! You may click here to download the driver for your printer. Please consider the operating system of your computer first before downloading the driver. Thanks for visiting FixYa.com!

You can obtain the drivers present in that cd from the following link.

http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=EN&CN2=SG&CTI=4&PRN=Stylus%20CX5500&OSC=WS

Click on accept to start the download.

After download install the drivers and restart your computer for the changes to take place.

try this, you need to turn OFF DHCP, START>>RUN>>services,msc press enter. Now scroll down until you see DHCP, Disable it, and set to OFF & Stop it, reboot. You see ths Printer will hand out address, at the moment BOTH are, and they are getting mixed up. Also ensure you are doing everything as Administrator.

According to the compatibility list, your printer is not listed. check here
The 1300 is listed but not the 1320. This maybe the issue.

I would suggest first upgrading the firmware for the print server to the latest by using these instructions

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=17164

the firmware is located HERE version 1019

after you have done this, let us know if this fixes your issue.

Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

you can find the softwear needed here just select your os

Hi it is the problem called intermittent rebooting. Plz chk the firmware of the printserver and reconifgure it by downloading the latest firmware from the linksys website.

linksys always has a default password.
admin
admin
If you changed it you can reset it by holding down the reset in the back and unpluging it.

hi sir,

1. first reset the printserver
2. make sure that the printer drivers are installed on the comp.
3. use a w/l comp on which we can go online
4. connect the w/l comp to the print server using ethernet cable and also connect the printer to the print server
5. put the print server cd into the comp and run setup.
6. make sure printer server is near to router and there is no firewall on the comp.
7. the setup will give the ipaddress to print server if not plz assign static ip on the printserver.
8. follow the wizard
9. it will ask u the w/l settings to enter. plz type the exact same n/w name and security password.and apply the settings.
10.after that it will connect u to the print server and u will be able to print if you will not u will find an error to open port.
11.you need to open standard tcp/ip ports for the printserver ipaddress that u have assigned.
12. if u dont knw, u can ask the comp vendor.
13. plz also confifm that the printer is compatible with ur print server.

thanx and regards
sukhiii

It's pretty sad. This device doesn't support Mac and apparently it doesn't support Windows either! I expect a lot more from Linksys. It seems like this is a common problem yet they offer no clear solution on their web site. Do you think maybe Linksys is going out of business and isn't going to support their products anymore?