Cavalry Storage Cavalry CAUO37500 500GB OneTouch Ext USB 500 GB USB 2.0 Hard Drive - Answered Questions & Fixed issues

0helpful
1answer

Forgot to turn off before unpluging it, now my laptop will not detect

Try it on a different computer if possible. If it shows up, run chkdsk /f on it from the command prompt. If chkdsk /f fixes corruption, try it then on your Tosh laptop. There is a space between CHKDSK and /F
12/15/2017 2:20:30 AM • Cavalry Storage... • Answered on Dec 15, 2017 • 71 views
0helpful
1answer

The drive will not spin

you have a dirty hard drive the clicking sound is the reader arm skipping across the hard drive platters give your hard drive a firm tap to side which will free up the reader arm once you freeze it it will only last a short amount of time
11/13/2010 5:37:38 AM • Cavalry Storage... • Answered on Nov 13, 2010 • 176 views
0helpful
1answer

The front light changed from blue to red and now

http://www.fixya.com/support/r4247716-usb_device

Check ther for most of the simple and common fixes

Bob
12/16/2011 3:30:08 PM • Cavalry Storage... • Answered on Dec 16, 2011 • 426 views
0helpful
1answer

Dropped external drive not responding

try Drive regenerator on Hirens bootcd.
3/25/2010 10:13:53 PM • Cavalry Storage... • Answered on Mar 25, 2010 • 270 views
0helpful
1answer

Wd Hdd inaccessable

try to disable all firewall setings or antivirus...after try accesing frome ur command prompe if u can that the windows is blocking the hdd...uninstall any new software or driver and try again...no effect ok dowload ophcrack live cd frome google and access the hdd by force repare or scan it in surface scan that will fix ur clusters problems that might be in the back off this prob an du know wer e2 go frome there
2/14/2008 8:54:55 PM • Cavalry Storage... • Answered on Feb 14, 2008 • 380 views
0helpful
1answer

CAUM37500 CAVALRY HARD DRIVE NOT GETTING DETECTED

head crashed is the most likely reason.
drive has lost its directory and boot segment address.
you have lost your drive functionality.
the drive would need to be much larger than average to bother fixing, but if you need the data, then you can send it in for repair. expect 500 to 2500 for data recovery/repair.
sorry for the news.
mark
12/23/2007 9:57:37 AM • Cavalry Storage... • Answered on Dec 23, 2007 • 780 views
0helpful
1answer

FILES NOT ACCESSIBLE

what error codes are you getting?
1/20/2008 11:40:57 PM • Cavalry Storage... • Answered on Jan 20, 2008 • 116 views
0helpful
1answer

Cavalry hard drive gets error message

click start control panel administrative tools computer management then select event viewer depending on what operating sytem you have this may vary extend the events there you will ((see errors in red)) you will no what exactly what the error was and at what time it occured you might be able work your way through the problem if it's a program file you might uninstall the program restart your computer then reinstall some of these files/software hope this helps
5/9/2012 9:43:17 PM • Cavalry Storage... • Answered on May 09, 2012 • 138 views
0helpful
1answer

I have an unused internal 500 hard drive in an enclosure. Will upgrading it to a USB 3 enclosure do anything?

sadly we can not tell you if it will even work for what you want to do
11/27/2020 12:33:48 PM • Cavalry Storage... • Answered on Nov 27, 2020 • 52 views
0helpful
1answer

Constant beeping from Cavalry external HD

Can't say exactly what it means technically speaking, but my experience with such a problem is that the drive is 'dead'. Of course trying it on another computer would be constructive.
12/15/2017 2:17:42 AM • Cavalry Storage... • Answered on Dec 15, 2017 • 167 views
0helpful
1answer

My black calvary external hard drive won't turn on.

Would be great if the next time you also place the model number, because Cavalry makes dozens of different drives. When the bleu light does not go on, you have to assume the drive is not getting power. If the drive has only one cable, (small drives like 2,5 inch most of the time only have one cable) it could be the USB cable is defect and can't give through the 5 Volt coming from the computer USB connector. It also could be the 5 Volt supposed to be in the computer has gone. If you have to connect an external power supply, with a small cable to the drive, I would check the power supply. A 5 Volt 2 A supply, with the round plug can't be that expensive. If both don't work, it also could be inside the housing of the drive is something defect. If you need to have the data on the drive, you always could but an universal USB connection for hard drives. I have one for IDE and E-SATA, in the box came a set power cables and a power supply, but that one was almost 50 dollar. There are cheaper ones on the net. Be aware drives don't live forever and make sure you always have at least two backups. (that is more than one origin; and one back up)
6/17/2014 12:05:52 PM • Cavalry Storage... • Answered on Jun 17, 2014 • 159 views
0helpful
1answer

Error message says I don't

Hi there, It sounds like your network administrator has locked your ability to write to certain folders. If this is a home hard drive, the only way to fix this would be to completely reinstall windows. If it's a work computer, you need to talk to your IT Department. -Alex
8/13/2011 2:15:34 AM • Cavalry Storage... • Answered on Aug 13, 2011 • 248 views
0helpful
1answer

My computer not recognizing hard

check the power and data cables and try to but the bios into the default sittings
8/5/2011 1:30:26 PM • Cavalry Storage... • Answered on Aug 05, 2011 • 384 views
0helpful
1answer

CAUO37500 Lite's on but nobody

im not sure how bad your hard drive is but if it works on another computer
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable, just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again, check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems also make sure the computers Ram and Cmos battery are securely seated hope this helps also you could run the chkdsk utility click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive another way of running the chkdsk utility click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart do not do anything while the chkdsk utility is in progress any input may damage your computer then defragment your hard drive also you might download and use this registry cleaner it is totally free to use http://download.cnet.com/ccleaner/

6/18/2011 8:10:59 PM • Cavalry Storage... • Answered on Jun 18, 2011 • 234 views
0helpful
1answer

Transfer between 2 External Drives

the best program for this file transfer is Director Opus 9 this can transfer 100gig in under 1hr as with windows transfer takes 6hrs.

As I do alot of video capture and my filse range from 400mb to 4gig in size and having to transfer 700 gig about would take forever and with this program quick and easy you also can transfer over lan or wirless net.

happy transfering
7/9/2008 4:20:01 AM • Cavalry Storage... • Answered on Jul 09, 2008 • 213 views
0helpful
5answers

How to run python script?

How to Run Your Python Scripts - Real Python

realpython.com > run-python-scripts
To run Python scripts with the python command, you need to open a command-line and type in the word python , or python3 if you have both versions, followed by the path to your script, just like this: $ python3 hello.py Hello World! Video as well https://www.google.com/search?q=how+to+run+python+script ..
2/4/2023 9:25:19 AM • Computers &... • Answered 9 hours ago • 54 views
0helpful
1answer

Hi i need network and sound drivers for a Mecer z140c laptop

You can download network and sound drivers for the Mecer z140c laptop from the manufacturer's website. You can also find drivers from other sources, such as driver websites or from the laptop manufacturer's support page. Make sure you download the correct drivers for your laptop model and operating system so that the drivers work properly.
2/4/2023 5:58:32 AM • Computers &... • Answered 13 hours ago • 21 views
0helpful
1answer

Can not communicate with Piczel model 165 IP camera. Do have any info or manuals? thanks.

Question edited for clarity. The is an eBay / Sam's club special made in China. The reviews say to speak to 'Dan'. https://www.samsclub.com/p/165-4pk-p-t-wifi-cam-ir-leds-cut-filter/prod8040049 https://www.google.com/search?q=piczel+165+ip+camera+manual ..
2/2/2023 8:22:17 PM • Computers &... • Answered Yesterday • 18 views
Not finding what you are looking for?
Cavalry Storage Cavalry CAUO37500 500GB OneTouch Ext USB 500 GB USB 2.0 Hard Drive Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Cavalry Storage Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19166 Answers

Cindy Wells

Level 3 Expert

6587 Answers

Are you a Cavalry Storage Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...