20 Most Recent
Motorola Mobility Bluetooth Headset-Silver/Black Headset - Page 4 Questions & Answers
1 Answer
Motorola gp338 plus EEPRM CS ERROR help me
aTOK.
that error means the firmware is scrambled.
CS = check SUM of the EEPROM firmware failed,
or, OMG
a low battery, there are 6 choices of recharable batteries,
but they can go bad, just like all batteries do often
charge it for 24 hours yet,??>????
it is a walkie talk transceiver, radio. hand held.. not just a radio
Radio...
|
Answered
on Feb 27, 2020
1 Answer
How do I pair my beat 200 BT car stereo
If you're referring to the 200bt portable speaker set, this isnt possible. Car stereos are only designed for input over bluetooth not output. Now if it really important to you, you can use a line level adapter to tap into the rear speakers of your vehicle, take that output and plug it into your speakers with an aux cord, or if you have an after market radio you can use RCA cables and a jack adapter to do the same. If you must bluetooth (eg. out of vehicle operation of speakers) buy a cheap bluetooth output adapter (shark makes one) use a small cigarette lighter inverter to power it, and then you can plug your aux jack into it and bluetooth to a speaker set outside of the car. If you use this in conjunction with the speakers car there will be a delay between those speakers and your bluetooth speakers.
Radio...
|
Answered
on Feb 17, 2020
1 Answer
How to fix
Bluetooth wireless earbuds paired and connected to my device but no sound
Make sure that the pair on your output device states paired for phone and music. It can still pair for phone and data but not pair to stream music. This is common on android devices especially. If this be the case, unpair the device and forget (delete) the earbuds on your output device. Ensure any bluetooth devices like amazon Alexa, TVs and other common things are powered down. Turn the bluetooth on the output device off, then back on. Search for earbuds and follow manufacturer procedures to sync earbuds. Once found, pair. Ensure when a successful pair happens that they are paired for phone and music. It will tell you on the output device if the pair was successful for both. At this point make sure your volume settings are not muted or all the way down and you should be enjoying music if you have an app playing music.
Radio...
|
Answered
on Feb 17, 2020
Not finding what you are looking for?
