Durabrand BH1304D 13" TV - Answered Questions & Fixed issues
Durabrand tv codes
I seem to be the only person on the net with the 3 digit Durabrand universal remote code which works for 13' and up Durabrand TV's and TV/DVD TV/VCR combos. The culprit is 3 digit code 189 for a Funai and Emerson. I only know this because I have like 4 of these TV's haha.
Ron
[email protected]
3/29/2014 2:26:04 AM •
Durabrand...
•
Answered
on Mar 29, 2014
•
26,848 views
Lost remote
I have no remote. I want to get to the game node. Have nex Xbox and does not show up on my tv. HELP.
5/31/2013 7:08:45 PM •
Durabrand...
•
Answered
on May 31, 2013
•
543 views
Universal Remote Control codes
use the codes 520, 115, 916, 027. i just used them for my durabrand 13 in tv. i actually used 520! it works with the phillips magnavox universal remote.
8/31/2012 10:16:35 PM •
Durabrand...
•
Answered
on Aug 31, 2012
•
5,063 views
Programing a universal remote
a manual well help...cuz there are different types of codes for different types of applainces....is that for tv?
5/14/2012 7:12:27 AM •
Durabrand...
•
Answered
on May 14, 2012
•
34 views
What is the default channel
It depends on how you have your Dish Network box connected. You need to cycle through your Inputs using your input or video source button. If you could tell me how it was connected I could tell you exactly what input to use.
Hope that helps!
7/19/2011 1:45:26 AM •
Durabrand...
•
Answered
on Jul 19, 2011
•
155 views
Remote control code for BH1304D
Hello
Four digit universal remote control codes for Duraband are:
0189 0135 0157
0153 0254 0458 0217
Direct Code Entry
- Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
- Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
- With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
5/20/2011 2:51:08 PM •
Durabrand...
•
Answered
on May 20, 2011
•
343 views
I HAVE A DURABRAND TV
Try the brand "Sansui , ILO, and Orion. These are the same TVs. Thanks for asking and show all hands of support!
4/18/2011 2:20:55 AM •
Durabrand...
•
Answered
on Apr 18, 2011
•
206 views
I have a 27"durabrand and moved to a place where
We would be happy to help you with getting your DISH Networkremote to control your Durabrand TV. Press and hold the TV button located on the top ofyour remote until all mode button back lights come on, then release. Usethe number buttons to enter the codes for your Durabrand TV; here some ofthe codes we currently have: 220, 233, 720, 834, 733, and 623. Press the pound (#)button to save the code in the remote. To check that the code works try several different functions on theremote to make sure it will properly operate the TV. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment.
We hope this helps and thank you for being a valued DISH Network customer!
Phillip Chang
DISH Network Customer Service Representative
2/28/2011 9:28:50 PM •
Durabrand...
•
Answered
on Feb 28, 2011
•
124 views
TV/av mode
no there isnt u have to get a new remote. The GE remote is cheap and the code is 0157. its the only code for that remote that works properly
2/27/2011 12:02:10 PM •
Durabrand...
•
Answered
on Feb 27, 2011
•
679 views
Not finding what you are looking for?