Top 20 D-Link Dns 323 2-Bay Network Storage Enclosure - Nas Server (S6070845) Questions & Answers

Try to replace network card

With difficulty.

had you found a solution ? i'm front the same problem :(

This may be problem with your personal firewall on Windows workstation where you are running the Easy Search utilit. Try disabling the firewall while you run it.

Make sure that the ports for the application are open in both your modem and router

The best thing to do is to install a bare fun_plug with telnet capability. If you do not know where this is, one version is available at http://www.inreto.de/dns323/fun_plug. Just follow the instructions in the README file for the latest version.

Restart your DNS-323. Once it starts back up, do the following:

1. Login to your device using telnet. Most OS have this or you can use a free downloadable client like putty
2. You will be faced with a Linux # prompt. From here you can change the password of admin by typing:
# passwd admin
3. After changing the admin password, exit from putty and try logging in to your device via a browser'

You should be able to login using the new password

Please rate our help to keep this free service online

I had the same problem when I was attempting to map the drive using the hostname of the DNS-323. I solved the problem by typing in the IP address instead. Do the following:

1. Login to the DNS-323 as admin
2. Make sure you use static IP's to make sure that the address does not change in the future.
3. Go to the drive mapping page and use IP address instead of hostname in the drive mapping (e.g. \\192.168.1.1\Volume_1)
4. Make sure you use a valid username and password.
5. Check the connection configuration by clicking on the Test button.

You should get a successful outcome, otherwise check all the settings again until you are successful

The USB port on the D-Link DNS 323 NAS is for a printer only. It won't work with your WD TV. Your best bet would be to plug the WD TV into a PC that is connected to your network along with the D-Link DNS 323 NAS and serve your media files that way.

Try going into Kaspersky, settings, firewall, and then select the network tab. Under the local network tab you may find the security is set too high, and this is what is blocking the print run. Settings from high to low are Public > Local > Trusted. Change the security setting down for your LAN the printer is on to Local, or trusted if you know what you are doing. Worked for me. I had similar problem - printing worked, then installed Kaspersky on all machines and printing became erratic on wife's laptop.I had different settings on the wife's network settings for her wireless and wired LAN, and I think the erratic behaviour came from fact that one of them was public, and one local. Changed down and all was fixed.

Try to do the following:

1. Login to your DNS-323 in the same network
2. Make sure FTP is turned on and a user is configured to perform FTP to it
3. Ftp to your DNS-323 using the admin account

If this still does not work, read up on Fonz's fun_plug application and install it. This should let you access the linux firmware in the 323 for troubleshooting. Be aware that you need to know linux before you attempt to do this as you may brick your 323 if you are not careful.

The new firmware already has bit-torrent capabilities built into it. Please do the following:

1. Download the latest firmware from D-Link website
2. Save your configuration in case there are any problems
3. Upgrade firmware from the DNS-323 menu

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640

You can get best d-link router support phone number at Toll Free Number ( 1-877-769-0969 ). D-link router Tech Support number ( 1-877-769-0969 )

the manual is free , at dlink dot com you push the reset button for long time per manual 15sec (iirc) the release it and now all defaults are set. per the manual, google dir-655 manual. easy as pie if you just read the manual.

Warning to FixYa readers -DO NOT CALL THE FAKE TECH SUPPORT NUMBERS POSTED ALL OVER THIS SITE. These phony support numbers or web links send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website {edited by volunteer Expert}

KATHERINE, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

SUSAN, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Ethernet/USB Print Server it is for even windows 98 (OMG ) page 7 is setup. NO OS stated by you, at all. why:? page 3 is OS compat. after reset the default address is 192.168.0.10 5volt power pack is NOT OPTIONAL. 1998 what did you read the free manual yet. the last page shows printer compatibility list, does your match? where would you find a printer that old working now. crickets...??? my guess is 2003 year made. XP first release is that. one manual for it stamped 2003 so is 17 years old relic fodder for sure, recycle it is best. first hit https://eu.dlink.com/-/media/consumer_products/dp/dp-300u/datasheet/dp_300u_datasheet_en.pdf RTM ! no 17 year old printer works today, not really.