20 Most Recent Whirlpool GZ7730XGS Stainless Steel Kitchen Hood Questions & Answers


Fan and light not working where is fuse box?

Hi - I have a neff extractor fan and have the same problem. The light and fan have both stopped working. Does anybody know where I can find the fuse as I suspect that this may be the problem too?
2/5/2013 4:17:25 PM • Whirlpool... • Answered on Feb 05, 2013

Neff extractor fan not working

I have a similar problem with a Whirlpool oven hood. In my case the kitchen fiitters used a (UK) standard 3-pin plug to power the hood. The plug is fitted into a socket that is placed on top of the cupboards that house the hood.
I have replaced the 3 amp fuse in the plug and now the fan is working.
HOwever, the light isn't working and so I'm assuming that the bulb has blown and that this has caused the fuse to blow as well.
Now my problem is accessing the bulb so that I can replace it.
9/19/2009 5:03:37 PM • Whirlpool... • Answered on Sep 19, 2009

Whirlpool GFE471LVQ0 electric oven. Broiler stays on in bake mode

Disconnect the mains power for 15 minutes to try and reset the control boards. It may be that the bake switch is faulty. Call for service.
1/25/2023 3:58:59 AM • Whirlpool... • Answered on Jan 25, 2023

Whirlpool gas range diagnostic code E6 46 (cannot find this error code combination anywhere)

E6 46 is a diagnostic code for a Whirlpool gas range. This code indicates that there is a problem with the oven temperature sensor. The sensor measures the temperature inside the oven and sends this information to the control board. If the control board detects a problem with the sensor, it will display the E6 46 error code. To troubleshoot the problem, you'll want to do the following:
  1. Check the wiring: Make sure that all of the wires connected to the oven temperature sensor are secure and not damaged.
  2. Check the sensor: The oven temperature sensor is located in the back of the oven, near the top. Make sure that the sensor is properly seated in its socket and that it is not damaged.
  3. Check the control board: If the wiring and sensor appear to be in good condition, the control board may be the cause of the problem. You'll want to check the control board for any visible damage or loose connections.
If you are unable to find the problem, I recommend having a qualified repair technician diagnose and fix the issue for you. Electrical issues can be complex and it's important to address them promptly to prevent further damage.
1/8/2023 1:32:12 AM • Whirlpool... • Answered on Jan 08, 2023

What is F9 code for whirlpool stove

The F9 error code on a Whirlpool stove typically indicates a problem with the oven temperature sensor. The oven temperature sensor is a device that measures the temperature inside the oven and sends this information to the control board. If the sensor is not functioning properly, it can cause the control board to display the F9 error code.

To troubleshoot the problem, you can try the following steps:

Check the oven temperature sensor: Make sure the sensor is securely connected to the control board and not damaged. You can also check the resistance of the sensor using a multimeter to see if it is within the specified range.

Check the wiring: Make sure all the wiring for the oven temperature sensor is securely connected and not damaged. Check for any frayed or damaged wires, and repair or replace them as needed.

Check the control board: If the oven temperature sensor and wiring are in good condition, the problem may be with the control board. You can try resetting the control board by unplugging the stove and waiting a few minutes before plugging it back in.

If these steps do not resolve the issue, you may need to take the stove to a professional appliance repair shop for further evaluation and repair. They will be able to diagnose the problem and recommend the necessary repairs.
12/24/2022 4:37:31 PM • Whirlpool... • Answered on Dec 24, 2022

Display gone blank, stove top works, no way to turn on oven, no lights or indicators illuminating? Hoping for a fuse, not control panel replacement

The fuse is your breaker. There may be a fuse hiding under the control board display but unlikely. It is likely to be the control panel itself. I would suggest dealer service as they are expensive, need correct diagnosis and warranty on the part and the replacement labour.
12/6/2022 2:02:20 AM • Whirlpool... • Answered on Dec 06, 2022

Whirlpool range SF362LXSS0 replaced both igniters and still oven won't turn on

All Gas Ovens can be fixed, but the should be serviced by a registered gas technician. The spark igniter is only one part of the lighting procedure, they also have a thermocouple, which is a safety device that open the main gas valve once certainly criteria are met usually a pilot light flame. The parts schematic shows the gas valve and it is $181. I don't see a safety thermocouple. https://www.searspartsdirect.com/model/2v56d5n3jv-001198/whirlpool-sf362lxss0-gas-range-parts This is the part that is likely to have failed, but I am reluctant to suggest you change it on my say so. Pay the extra $75 for a qualified technician to diagnose and replace. It has electrical contacts, so the fail safe is probably inside and is dependent on the spark igniter being fully functional. https://www.searspartsdirect.com/product/5w6dsrlw7b-0022-664/id-9761959 ..
2/13/2022 8:55:30 PM • Whirlpool... • Answered on Feb 13, 2022

I can't find wfe535s0jz0 Wiring Diagram? Help

normally on inside electrical cover
1/6/2022 1:24:59 PM • Whirlpool... • Answered on Jan 06, 2022

Whirlpool gas stove burner knob is loose

You should be able to pull the knob straight out. Don't lose the internal sleeve. Here is a quick DIY video. https://www.youtube.com/watch?v=NSChe0uwRvA Or you can put some Loctite glue in the cracks on both sides before you tighten the zip Just to strenghten this in case it gets bumped again.
1/4/2022 6:16:23 PM • Whirlpool... • Answered on Jan 04, 2022
Not finding what you are looking for?
Whirlpool GZ7730XGS Stainless Steel Kitchen Hood Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6611 Answers


Level 3 Expert

85242 Answers

Paul Carew

Level 3 Expert

3759 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Kitchen Ranges

  • Whirlpool Kitchen Ranges

Most Popular Question

fan light not working fuse box

  • Kitchen Ranges