20 Most Recent Samsung 226BW Monitor Questions & Answers


This is an indication that the power board in the monitor is bad.

Samsung 226BW... | Answered on Mar 02, 2017


At this point you need to open up the monitor and inspect the inside.
Most common failure in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG and other monitors to get some ideas what goes wrong: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://www.badcaps.net
http://en.wikipedia.org/wiki/Capacitor_plague

Samsung 226BW... | Answered on Nov 13, 2014


A flashing power indicator is a common symptom of a failure in the power supply board filter capacitors. If you can do a little soldering then you can do the repair it yourself. Here is a link to repair information:

http://www.ccl-la.com/catalog/product_info.php?products_id=138

This video shows how to open the monitor to get to the power supply board. It is for the 225BW but the case is the same.




I hope this helps you get your monitor going again.
BuddyMc

Samsung 226BW... | Answered on Nov 26, 2012


Maybe the screen is just a faulty one. If you have a warranty for it, GET IT REPLACED. problem solved in my opinion. if you tried it on another computer it will be a problem with the monitor. take it in and get it checked out.

Tech Support ' Hotmail Support

Samsung 226BW... | Answered on Sep 13, 2012


You may have a faulty inverter or loose power inverter connection. OR
You may have a defective CCFL backlight, it may have the following symptom: Screen flashs on red/pink and off. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture flickering on and off. All these symptoms indicate that the LCD backlight lamp (CCFL Lamp) has reached the end of the life and all you need to do is replacing the CCFL lamp.
Connect an external monitor to your laptop and power the monitor up first then the laptop, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight. Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
Check out
www.lcdparts.net

Samsung 226BW... | Answered on May 09, 2012


There are two problems, microprocessor controller not working properly, and the LCD panel is defective, replace the video cord from the computer to the monitor if possible just to rule out the screen issue, if no change! I recommend replacing the item due to cost over runs to repair.

Samsung 226BW... | Answered on Apr 01, 2012


First, the caps can look OK but they can have high ESR (http://s807.photobucket.com/albums/yy352/budm/Bad%20capacitors/)

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net
Service manual:
http://elektrotanya.com/?q=showresult&megnev=SAMSUNG megnev2 =% 20 & 245B & Category = & kat2 = all

Samsung 226BW... | Answered on Oct 03, 2011


This model may have defective capacitors in the power supply. I normally replace the 2 or 4 bulging caps and normal function is restored.
Monitor Mike

Samsung 226BW... | Answered on Jul 28, 2011


You will have to oen it up and inspect the inside.
Most common failure in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, falied inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas what goes wrong: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further.

Samsung 226BW... | Answered on Jul 28, 2011


Hi.
That problem means can't detect your hardisk device. Try to open your CPU then check up data cable and power cable of hardisk for loose wiring ,burn or defective cable and fix or change it. then try to boot again.

Samsung 226BW... | Answered on Jun 13, 2011


Service manual: http://elektrotanya.com/?q=showresult&megnev=samsung&megnev2=226bw&kategoria=&kat2=all
I m not sure exactly which connector you are talking about.
http://s807.photobucket.com/albums/yy352/budm/SAMSUNG/SAMSUNG%20226w/

The fixxing sound can be from arcing in the lamp assembly.
http://s807.photobucket.com/albums/yy352/budm/Bad%20backlight%20lamp/

The inverter will go inot shutdown if it senses open circuit (lamp does not fire up), or too much current draw (arcing voltage to the lamp casing).
You need spare lamps to test the inverter board.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Samsung 226BW... | Answered on May 15, 2011


might be just the invertor going bad, mine does that when i install new devices, you can probably check the hertz its set at. 65-70 is a good setting check the setting of the video card.
could be a sign the monitor going bad, capacitor are usually the culprit, you might need a professional look at it, test it with another computer to be sure.

if it still blinks then the lcd might need a look at.

most LCD now 19-21 inch wide screens are cheap, check and ask if you get it repair how much it would be, buying a new one might be your best bet, because if you repair it, something else might go bad on it.

better to be safe than sorry

I’m happy to help further over the phone at https://www.6ya.com/expert/david_92c86cbc79e9b552

Samsung 226BW... | Answered on Apr 14, 2011


The problem is in the power supply/inverter board, this is usually caused by bad capacitors that in most cases have slight bulge at the top causing it to flicker and eventually shutdown. The only option is have them replaced.

Samsung 226BW... | Answered on Mar 31, 2011

Not finding what you are looking for?
Samsung 226BW Monitor Logo

92 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Computers & Internet

  • Samsung Computers & Internet

Most Popular Question

plug in all see white screen

  • Computers & Internet
Loading...