20 Most Recent Southern Telecom Emerson Bluetooth Headset Black Wireless Headset Questions & Answers

Hi, the iPhone 3G definitely does work with bluetooth. In fact, I'm talking on a bluetooth headset with my iPhone 3G right now.

You have to put both your Southern Telecom Emerson Bluetooth Headsetand the iPhone in "pairing mode".

On your iPhone, click the Menu button, tap the Settings icon, tap the General icon, and then tap the Bluetooth icon. Make sure that 'Bluetooth' is set to "ON" and not "OFF". As long as you have this screen up, your iPhone is in pairing mode.

Turn your Southern Telecom Emerson Bluetooth Headset off and wait a few seconds. On your Southern Telecom Emerson Bluetooth Headset, press and hold and Answer/End button for Five Seconds, until a solid blue light comes on, which places the device in Bluetooth discoverable mode.

Now that both devices are 'discoverable', the Southern Telecom Emerson Bluetooth Headset will show up on that Bluetooth screen on your iPhone. Be patient as it might take a minute to appear. Tap on the Southern Telecom Emerson Bluetooth Headsetin the list on your iPhone, and then it will ask you for a passkey. The passkey is "0000" (without the quotes). After you enter the passkey, the Southern Telecom Emerson Bluetooth Headset will show up on the list with the word "Paired" next to it.

Now you're paired! Incoming calls will automatically be passed to your headset as long as your iPhone can find it nearby.

Good luck.

the charger dont work i hope you have garantie

im temping to conect my wireless head set to my phone and do not know how

Yes it is perfectly safe. The easiest way to identify whether a bluetooth set is malfunctioning or unsafe is - HEAT. Normally batteries which are about to die or devices malfunctioning will heat up quickly when you charge it.

So unless you dont feel abnormal heat.. they are perfectly safe. Try to remove the BT earpiece when not needed. Your ear canal needs natural air flow. Blocking it with a prolonged use of a BT device could heat up the ear canal. That's where the problem starts! :-)

activate bluetooth option for iphone

try 0000

To pair a blue tooth device to a cell phone you first have to put the blue tooth power in the phone menu to on,then you must put the blue tooth device to discovery mode,to do this you hold down the power button while turning your blue tooth device on for6 to 10 seconds,there should be a silod light on the device,then in your phone menu you can add or search new device they should pair if everything is right,then it will ask for a pin pairing code .Most manufactures use a 4 digit factory code they are as follows 0000,1234,1111 or 9999,once your code is entered it will connect to the device,i hope this helps

hello ,now most blue tooth devices have to be put into a discovery mode,if you dont have your owners manual to follow the procuders most of the time you just hold the power button while turning the bt device on for 6 to 10 seconds and that turns it into discovery mode usually a solid light is on then when the device is found it will ask for a pin or pairing code,this is a 4 digit code,most manufactures use the following codes,0000,1234,9999,1111, hope this helps you out.

"0000" is the passcode for most of the Bluetooth headsets.

I couldn't find any informations about EM228, but if you've meant EM227 instead, the pairing code is '0000' (four zeros).. If its user guide happens to be missing, or, rather, you need further informations on how to pair it with your phone, feel free to download it from this location.

Please, let me know if I can help you any further.
Regards, Carlos

There is no way such devices would pair with your ipod touch. It is only a few of such devices that can pair up with the ipod touch due to apple's strict security and procedures.