20 Most Recent
IBM ThinkPad T60 Notebook Questions & Answers
Where do i find user
Follow this
LINK for the manual you need. Please comment if the information has been helpful. Thank you and regards.
How to replace monitor screen on ibn thinkpad t60
I have the same problem with my IBM T60. Screen is very dark, and I have to move it up and down to try to get it to flicker on. Right now, I have another monitor plugged in.
The laptop is about 4 years old and has been used daily.
Thinkpad T60 starts up with a POST error of 8611
Turn the ThinkPad on. It gets the error 8611,
and you get a popup to TEST or RESTART.
- Type RETURN to Test -- this gets you to a screeen full of System Tests.
- Get out of the Test Screen, by typing ESC,
this gets you to the main BIOS 'Easy Setup' page.
- Choose 'Config', it comes up with: Memory; SystemBoard; Display, etc.
- Type: CTRL-D (undocumented!) -- this gets you into
the 'System Configuration Edit Utility', which allows you
to edit the BIOS BootCode in the CMOS (hack!).
- Change the value at Offset 20h from: 00, to: 01.
- Type F2 to Save, and then F3 to Exit the Hex Editor,
then type: ESC to get back to the 'Easy-Setup' page,
and select: Restart (hit Enter in response to OK?).
- It should now reboot, and bypass the 8611 error.
I have 0271 error can get into bios but not able
Hi,
The error means that you have to change the BIOS battery first before trying to change the date and time.
As far as i know with IBM's the CMOS (RTC) battery is located under one of the panels underneath the laptop and is usually covered with red, blue or yellow plastic with wires coming from it. Disconnect the battery and replace it
Once the CMOS battery is replaced you can set the date and time and no more error messages.
Regards.
Startup problem
Go into BIOS and select Default values.
That should take care of the problem
Please let us know how it goes.
Don't forget to rate
How do i connect to a printer
Hi Jenelle
I think we will need more information to be sure to fix this problem, like the model of the printer and are you trying to connect to it with USB cable or through network (with LAN or with wifi).
in most cases anyway make sure the wires are connected correctly (USB) and download the below link to identify and install your printer if it's not installed correctly.
press the identify now button after connecting it with USB.
HP Support Software Drivers
Not finding what you are looking for?