20 Most Recent LG HBM 730 Bluetooth Headset Wireless Headset - Page 2 Questions & Answers

If your Toshiba has Bluetooth functionality, yes.

Step 1 - Enable Bluetooth functionality on the Motorola V3m. Note: The Bluetooth power must be set to ON position to pair the device. From the main screen, press Menu [Center NavKey]. Scroll to Settings & Tools. Scroll to Connections, press [Center NavKey]. Scroll to Bluetooth, press [Center NavKey]. Scroll to Setup, press [Center NavKey]. Scroll to Power XXX, press [Center NavKey]. Scroll to On or OFF, press [Center NavKey]. Step 2 - Put your fully charged Bluetooth headset into pairing mode. Start with your Bluetooth accessory powered off. Hold down the power/end key for 5 seconds. You'll hear a short beep and the LED light turns red. Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset. Step 3 - Pair the Motorola V3m with a Bluetooth Accessory. From the main screen, press Menu [Center NavKey]. Scroll to Settings & Tools. Scroll to Connections, press [Center NavKey]. Scroll to Bluetooth, press [Center NavKey]. Scroll to Handsfree, press [Center NavKey]. Place accessory in pairing mode. See accessory pairing instructions. Scroll to Look For Devices, press [Center NavKey]. Phone displays Scanning. Scroll to XXXAccessory NameXXX, press [Center NavKey]. Phone displays Bond With XXXAccessory NameXXX. Press Yes [Right SoftKey]. Phone displays Enter Passkey. Enter 0000, press [Center NavKey]. (See accessory instructions as passcode may vary.) Phone displays Connected.

the pin is the pass word try 0000 chow !

can you pair this headset with different devices? Meaning, it is paired with my husbands phone, and I'm wanting to pair it with my phone when he isn't using it.

Try 0000 or 9999

jst put 12345 or 0000

i have the same problem. have you found a solution?

look at the sticker on the bluetooth.. there will be two letters iun front of the 4 digit pass key. ex. CE 1132. the 1132 is the pass key

You must hold the poer button down until you see the light blink 4 times and then it is turned on.

You need to work out if the charger or the device is faulty. The faulty item will have to be replaced by the shop where you bought it.

Hi decross 903 Did you find a solution....I have the same problem? I plug it in to charge, the light comes on temporarily and then off. I have no idea if it is charging or not.

Be sure your headset is in pairing mode. Here is a PDF manual for you check out how to pair it to your phone. Hope this helps Fix Ya up.