20 Most Recent Rockwood XR-6770 Coaxial Car Speaker Questions & Answers

The brand of Rockwood, I'm sorry to say, is not good. They get the name by robbing "Rock" from Rockford Fosgate, and "wood" from Kenwood, to be misleading. If you have big plans for your stereo, i would not recommend using them. Having said all that, they might do the trick and last for years if you are not the type to abuse them. I have a Road Gear amplifier I bought from WalMart 10 years ago that I refused to toss out and now have it in my work truck. Again, the brand may not be good but sometimes specific items are. Good Luck.

Call A Rockwood repairing dealer or go in their website to get the factory's phone number.

simply use the two outside speaker connectors in order to bridge them

Rockwood was a very low level brand. Alot of their amps were not brigeable. If bridge able the bridge terminals should be marked (usually the positive of 1 channel and the negative of the other channel). Under no circumstances bridge to less than a 4 ohm load.

If its u run the speak wires to each on its called. But if u want run the speakerd in 4 ohm just run in seriou way

You must connect the amp to a power supply capable of 12VDC at over 30 amps and either have built-in current limiting capability or install a fuse in-line with the power wire.