Canon C2058 Color Copier - Answered Questions & Fixed issues


nesesito saver qe es el error 45 en una fotocopiadora canon c 3380i de antemano gracias

Canon C2058... | Answered on Jun 07, 2012 | 241 views


Most likely the Yellow drum is failing. Check to see when it was last changed. They are expected to last approximately 50,000 prints or one year.

Canon C2058... | Answered on Jun 15, 2011 | 35 views


Look on eBay, that's where I get mine

Canon C2058... | Answered on Jan 15, 2010 | 98 views


This problem fault manual presenting the track. Follows to consider several reasons. Check the condition rubber roller seizure of the paper. Check and clean lower brake platform. Check and value the possible ragged sheet of paper. Check presence a stranger subject in giving device. Try to give the paper along on format by narrow side. Thank you, good luck!

Canon C2058... | Answered on Jan 18, 2010 | 275 views


from left to right the last drum has a failure pretty sure this is your black drum assy

Canon C2058... | Answered on Sep 11, 2009 | 101 views


E240 Error in communication of controller
0000 Error in communication data Check connector, check connection of sub PCB in the
controller box, check / replace DC controller PCB /
main controller PCB
0001 There is no response when 3 sec passed since the main controller had sent the pickup
request to DC controller during printing.
0002 There is no response when 4 sec passed since the main controller had sent the request
for image output to DC controller during printing.
0003 The engine is activated when jam occurs.

Canon C2058... | Answered on Jul 09, 2009 | 416 views


pretty common need to replace print board try nationwide board repair

Canon C2058... | Answered on Dec 07, 2008 | 60 views


Request from Canon.

Canon Office... | Answered on Jul 22, 2020 | 15 views


Abnormal rise in temperature and humidity

Canon Office... | Answered on Jul 12, 2020 | 20 views


What OS do you have? Please add the update version for Windows 10. The drivers are still available from Canon here: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/i-series/i9900?tab=drivers_downloads for supported OS versions. It looks like the printer used Windows Update for to install most of the drivers under Windows 7. There is an optional update for the driver on the site but it doesn't work unless Windows Update installed the basic driver. The Canon didn't officially support the printer for any OS after Windows 7.

The Windows 7 driver worked under 8 (8.1) and some versions of Windows 10 for a while. (Under Windows 8, the ZoomBrowser software didn't work.) Then Microsoft became strict about not allowing unsigned drivers to install. The easiest solution is to find an old Windows 7 computer to connect to the printer. Alternatively, get an unused install license and build a virtual machine to connect to the printer. Note: recent cumulative updates for Windows 10 have caused issues with USB printers.

If you are using Windows 8 or 8.1, try connecting the printer via the USB port with the machine off. The restart the computer; make sure that the Windows Update is set to find updates for other devices (not just Windows). If you are using the printer over a network, some found using the Canon ProMark 9000 series drivers worked.

I hope these ideas help. I wish that I had better news for you about Canon support.

Cindy Wells
(Building a virtual machine OS depends on your CPU allowing virtualization and free memory. You also need the Windows Pro or Enterprise versions of the OS for Hyper-V (Windows 10) or the Windows 8 VM equivalent. Third-party tools for creating a virtual machine may work on the home edition.)

Canon Office... | Answered on Jul 16, 2020 | 52 views


The following steps will help to fix this issue:
  1. Get a lint free cloth, rubber gloves (so toner doesn't get on your hands), some isopropyl alcohol, and a soft paint brush and gently clean any rubber rollers you can easily reach.
  2. With a vacuum hoover out any loose toner particles.
  3. With a lint free cloth very gently wipe the transfer belt (not all printers have one).
  4. If all else fails, you may need to replace the transfer rollers / transfer belt.
Warning: make sure you wear gloves and don't touch the transfer belt film with your fingers or the hoover, you could leave a mark that will cause additional print problems.

Canon Office... | Answered on Jun 23, 2020 | 33 views


CHECK WITH CANON WE DO NOT KNOW ALL WE NEED TO ABOUT THEIR PRODUCTS YET

Canon Office... | Answered on Jun 17, 2020 | 39 views


Try removing ink cartridge and see if the error goes away. If it does, you have a bad cartridge. Sometimes that happens to new cartridges as well. When your printer shows a b200 error, the ink carrier will not move, so you have to gently move it to where you access cartridge to remove it. This is for all canon printers that have a 2 cartridge ink system. For printers with a removable printhead, see solution below:

Canon Office... | Answered on Jun 11, 2020 | 566 views


The Power button does not appear to be damaged. I've tried plugging the printer in in another room (by itself, no computer) and still nothing. I've also left it unplugged overnight and even tried using a different power cord. It just will not power on. Note, the printer was working just fine yesterday afternoon. The only thing I did was turn it off in mid-operation.

Even if the power button were damaged (and I see no sign that it is), it should turn on by itself when I go to print. Instead, I get an error message simply saying "the printer is not ready." (at first, I was getting a message that "the printer is offline", but I was able to toggle that by going into the Printer Properties in Windows and changing its online status.)

The printer is only slightly over a year old, so it's no longer under warranty (naturally). Newer models are junk, so even though Canon has a "trade-in" program, I'd rather fix this one (which SHOULD be something simple).

I bought the "Canadian" version of this discontinued printer specifically for it's CD printing capabilities. Newer models... and ALL U.S. printers... disable this feature (by law?) According to Canon (after I asked), there is no fuse inside the unit that might have blown.

Canon Office... | Answered on Jun 05, 2020 | 42 views

Not finding what you are looking for?
Canon C2058 Color Copier Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2301 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...