Top 20
Samsung WEP410 Bluetooth Headset Wireless Headset Questions & Answers
What is a BH08N
HelloI have found a guide that should help you :http://community.us.playstation.com/thread/2344930?start=0&tstart=0hope this helps.
I lost my instructions to
First you have to turn the blue tooth power to 'on' on your phone then you need to turn the power 'on' on the device,then you will need to pair the device to the phone,in your menu of your phone you should find a blue tooth option,there usually is a add new device or search first you must put your device into discovery mode usually when you turn on you bt device you just hold the power button on for 6 to 10 seconds and a solid light appears.now your bt device is in discovery mode,then on your phone you have to search or add new device if you put your bt device into pairing mode your phone will find it and then it will ask you for a pairin or pin code ,Most manufactures use a 4 digit pin code they are as follow 0000,1234,9999,or 1111 when it asks you for the code enter one of these and then the device should pair to the phone i hope this helps you
What is the samsung headset
Most blue tooth manufactures use a 4 digit factory pass or pin code they are as follows 0000,1234,9999 or 1111 i hope this helps.
I can not gei my headset to work -- at frist it
Hi
By unable to work....if you mean that you are unable to pair
it with your phone then try the code 0000 so that you can pair the device with
your phone and then it will work. However, as it's a new unit so please elaborate
the issue so that I can further help you? Hope this helps...please post back
for further assistance.
Daniel
How do i connect my bluetooth BH08 to my
Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above. Then you can discover it with your phone. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999
How to pair with iphone
Hello
1.From the main home screen of the iphone open "SETTINGS".
2.From the setting menu go to "GENERAL".
3.From General go to "BLUETOOTH".
4.In the Bluetooth menu you will see an on/off switch. Make sure you turn the switch to "ON".
5.From here you want to go to your bluetooth headset. Hold the on button for about 5-10 seconds until the light starts blinking. Once light is blinking go back to iphone.
6.In the Bluetooth menu (same as step 4) your iphone should have discovered your bluetooth headset. However if it is not paired yet. Open the headset menu.
7.In the headset menu you are required to enter the appropriate PIN number (which should be given inside your bluetooth headset instruction manual).
8.After you have entered the correct PIN number press connect.
9.From here your Bluetooth Headset should be connected and ready to use.
NOTE:Fully charge your bluetooth headset before syncing it to your iphone
Goodluck
Loud background noise
Have you already tried to lower the volume on the headset itself some steps, during the call, until you hear the conversation clearly?
Just my 2 cents...
Carlos
My samsung wep 301 will not pair with blackberry
Please rate. This is how we (advisor/problem solvers) get people to know...we know what were doing. Thanx
1.First make sure your phone is off. Do this by pressing and holding the Multifunction button (the one that flashes blue) for 4 seconds. For "OFF" it will flash blue and red along with a series of 2 tones. Then will stop flashing. For turning "ON" hold multifunction button for 4 seconds and it will flash BLUE 4 times and 1 tone indicating it is on. It will continue to flash every 3 while in stand-by mode and every 8 seconds while on a call. 2.Set your phone in "Discover mode" make sure you look at your manual on how this is done if don't know how. Usually found under Bluetooth settings. 3.Making sure your headset if off. Press and hold the Multi-Function button until the indicator light turns solid blue (hold for approximately 8 seconds). THE MULTIFUNCTION BUTTON WILL BE LITE ONLY HALF BLUE INDICATING PAIRING MODE. 4. You phone will find and ask to pair. Press confirm/OK and enter "0000" 5.If pairing successful, light will flash blue 10x rapidly before going to flash every 3 seconds. IF UNSUCCESSFUL LIGHT WILL REMAIN ON, AND YOU WILL HAVE TO RE-ATTEMPT.
How do you connect samsung bluetooth headset
Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999
Im trying to set up my blue tooth to work on my
You need to pair your PS3 with your bluetooth headset.
- Turn on your PS3's bluetooth and search for bluetooth devices.
- While the PS3 is searching and the BT headset is off, press and hold the call/end button on the bluetooth headset until it's light glows steadily. Do not let go until the PS3 finds it.
- Pair the devices and allow the BT headset to connect automatically.
- To connect, press and hold call/end button on BT headset like the one in step 2.
Not finding what you are looking for?