20 Most Recent Samsung Digimax S700 Digital Camera - Page 4 Questions & Answers

try connecting to a computer and see if you can format the memory card as It may be corrupt. or take card out and insert in a memory reader and format it.

jghjkhhhhhhhhh,h,khki

If you have an adapter to your memory card you can reformat it so that itll erase all the info for it by hooking it up on a computer. Try the erase pix or delete it from the cameras setting as well.

pls dnt 4get to rate solution

The iris in the center of the lens may be stuck open or damaged.
you can look inside the front a focus/zoom/ turn on off and see if it opens and closes.

the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:
-turn the camera on
-click on Menu button
-select options using left/right, up/down button
-select Set up 2
-Select Battery type
-Select Alkaline for non-rechargable
or Ni-MH for rechargable
-click OK button

this setting should be done when using camera for the first time and whenever you are switching battery types, from rechargable to non-rechargable and vice versa.

- install the software
- restart computer
- connect camera to PC, but make sure camera is turned off
- after connecting the camera, and the computer is ready, turn on the camera
- select Computer on camera LCD
- go to My Computer
- click on Removable disk
- click on DCIM
- click on 100SSCAM
- select all the images and copy them
- select a folder where the images will be saved
- paste the images

Suggest this a camera fault- return to seller or contact the Samsung web site Tech support Team

This can be a broken shutter cable inside the lens. Toes it still make the "click" (not from the speaker)?

be sure your lense and autofocus sensors are clean first thing.. then push the take picture button half way and it will autofocus. Pressing hte take picture button fully then will snap the picture.

Go into settings menu and format the card

If you have a computer, insert it into the card reader,l select it and format with your computer

The 401 takes MMC and SD cards, 2GB or smaller.

You should be able to follow the instruction available at this website. http://downloadcenter.samsung.com/content/UM/201301/20130129135843169/WB30F_English.pdf

You need to install Intelli-Studio, Please view the following guide how to start this installation. http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=1038212 Or download Intelli-Studio here: http://samsung-intelli-studio.updatestar.com/

Not sure what type or model of camera you have. But most camera's have a Mode dial. The best thing to do is to turn that dial to the little green camera logo. That is the automatic mode. If you have chosen the moon and star, you only can make pictures in bad light situations.

Have you considered NOT connecting your camera to your computer?The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).

I'm assuming you mean the IXY 2000 IS.Press cursor-down (marked with a one-handed clock) to bring up the shutter release menu, then use cursor-up/down to select the desired self-timer mode. Start the self-timer by pressing the shutter release button as usual.The IXY 2000 IS is called the SD950 IS in some parts of the world. You may download the SD950 IS manual from here. The self-timer instructions begin on page 73.