20 Most Recent D-Link (DUB-H4) 4-Port USB Hub - Page 7 Questions & Answers

Step 1: Download and Run/Save the Error Repair Tool Step 2: Next, click the SCAN button. Step 3: Click the REPAIR button to fix your errors. for more help visit CBR Tech Solutions

http://www.dlink.com/uk/en/support/faq/routers/mydlink-routers/dir-810l/how-do-i-change-the-wifi-password-on-my-router Instructions at above link

Hi there. If you want a home router, the only one I know of is the Apple Airport Extreme - http://www.apple.com/airportextreme/specs.html?aosid=p204&siteid=1503186&program_id=2554&cid=OAS-EMEA-AFF&tduid=e7367d6ee6a689760197e36025f1756e . Any DD-WRT capable router can support it though, if you install the DD-WRT firmware. Check out this site for help with that - http://dd-wrt.com/site/index. Any professional series Cisco router will support it. I would be careful with IPv6 though - most ISPs don't support it yet. Good luck! Alex

Basic steps to configure your router:

1. Set Up IP Address and Sub-net Mask for their router.
2. Now open the router Web Page by 192.168.0.1 in the browser URL.
3. Login with your User Name and Password.
4. For Manuall Configuration and Set-up router according to your ISP.

Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .

Check to make sure you have the correct wifi password and that other devices can connect to the same wifi using that password. Power cycle your router. If those dont work might have to try changing the Wifi security encryption type to WPA or WPA2. Would need to login into your router to do this.

http://www.dd-wrt.com/wiki/index.php/Known_incompatible_devices

try dlink.com or just google the URL http://support.dlink.com/emulators/wbr2310/lan.htm

why doy you need cd rom, it is far easier to visit dlink website. below is their instructions for setting router manually, remove the extensions if they are not what you want http://support.dlink.com/emulators/wbr2310/lan.htm

visit dlink website, they have lots of advice. you can google the URLyou want http://support.dlink.com/emulators/wbr2310/lan.htm

http://support.dlink.com/emulators/wbr2310/lan.htm look at dlink for mor info

Turn off your DSL/cable modem. Turn it on. Turn off your router. Turn it on. Reboot your computer.

You "bricked" it -- responsibly recycle this "dead" unit, and replace it.

Connect your computer to the router. Assuming Windows 7, click the "Start" button. Type 'cmd' into the search-box, and press ENTER. Type 'IPCONFIG /ALL'. Look for the IP-address of the "gateway" or "DHCP-server". Type that IP-address into your web-browser.

Reset the router to "factory default", which resets the ID/password. Then, reconfigure your router.

Do you have many other wireless networks in your vicinity? It could be interference from those networks.

Do other wireless laptops connect to your wireless router, and give good speeds? Do you have many wireless networks, other than your own, that show up when you try to connect? It could be interference from other wireless networks in your vicinity.

Do a Google-search for 'HB7251M 292'.

See D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/ and select your product. Download documentation and drivers.

Connect your computer to your router. It should automatically get an IP-address. Click the Windows "Start" button (Windows 7). Type 'cmd' into the search-box. Press ENTER. Type 'IPCONFIG /ALL'. Look for the IP-address of the "gateway", or the IP-address of the "DHCP-server". That is the IP-address that you want to type into your web-browser.