20 Most Recent
Questions & Answers
Wont eject round after firing
Probably the ejector itself, or the extractor.
You weren't too specific.
Is the round staying in the chamber?
Coming part way out?
Coming all the way out, just not ejecting out the action?
Coming out, and staying in full contact with bolt face?
Coming out, dropping away from bolt face?
Marlin 70510 336...
on Jul 19, 2014
How do I save weavers?
Hello, Tanvi -
1. Your question landed in the Fixya category for optics. "Optics" has to do with sight. I doubt that is the correct category for the question.
2. Please explain what "weavers" you are asking about and where (what country.) Are you referring the issue of suicides in the cloth weaving industry in India?
Note: Fixya.com receives questions from people worldwide. Those of us who volunteer to answer on Fixya are not mind readers and cannot guess what is meant by a question without more details.
3. You can add more information regarding your question by choosing Comment and typing added details.
on Jun 11, 2020
Trying to figure out how old my Whirlpool washer is?
Trying to figure out how old my Whirlpool washer is Locate your machine's nameplate, which contains both the model and serial numbers. On top-loading Whirlpool washing machines, open the lid and look for the tag at the top rear of the tub. On front-loading washers, the tag is usually inside the door or near the bottom of the left or right side of the cabinet. If the tag is not in one of those places, pull the machine away from the wall and check the rear. Record the serial number with a pencil and paper or take a photograph. Be sure to record the serial number, not the model number. Decode the serial number at an online source like Appliance Cafe or Appliance 411 (links in Resources). Whirlpool serial numbers include a code in the second character for the year the product was built. Before 1990, the character was a number; from 1990 to 2010 the character was a letter. The number sequence started over in 2011.
on May 13, 2020
I bought 2 outdoor CCTV.camera RV537B with night
I think I answer you question--when?? Take the good CCTV camera and hook it up to
monitor. Then hook up the CCTV camera and turn it on. Point the working CCTV
camera at the bad camera that is turn on. Now, look at the monitor which is
working with your operational camera. Look at the bad camera while it on, and
see how many IR LED's you can see on the bad CCTV, while it turn on. You should
be able to the IR LED glowing red. If not, then there is a problem with bad CCTV
IR LED's. Short wire, no power to the IR LED's. stewbison
on Feb 20, 2020
Not finding what you are looking for?