Honeywell L4064B2236 Fan/Limit Control Heater - Page 7 - Answered Questions & Fixed issues


l641a1039 USE L641A1039 CYLINDER STAT. The part number has been updated.

Honeywell... | Answered on Jan 13, 2019 | 65 views


Some context might help. Was it working before but now has this error? If you're just installing it, had you connected it to your wifi and have the app running or .. That initially strikes me as an incorrect wiring error but, not sure how or when you're getting it.
You might want to give us some more detail to work with here.
Additionally, you might want to visit this Honeywell Support page for info as well. > https://www.honeywellhome.com/supportsearch?br={489B8F52-15F5-49DD-B283-40D30099A3A1}#q=Wi-Fi%207-Day%20Programmable%20Thermostat%20%28RTH6580WF%29

Let us know if this helps.

Honeywell... | Answered on Jan 10, 2019 | 115 views


For the T6 Pro model, I found the installation manual; search for 33-00181.pdf. I pressed Menu and + for 3 seconds to get into Advanced Mode; then Select to enter ISU ("Installer Setup"); then Select several times to get to option 425 (Adaptive Intelligent Recovery). I then pressed "-" to make the setting zero (OFF); then pressed HOME to save the setting.

Honeywell... | Answered on Jan 04, 2019 | 1,079 views


Replace the battery. The Triangle and exclamation point mean the battery is in need of replacement.

Honeywell... | Answered on Jan 04, 2019 | 3,119 views


What colour are the lines?

Honeywell... | Answered on Dec 31, 2018 | 114 views


wrong temp? what temp is it showing? it is possible you dont have the time set properly so you are currently in your "sleep" period or wrong time period.

Honeywell... | Answered on Dec 16, 2018 | 36 views


If you are not sure of your system type or if you have other questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24 volt or 750 mV systems.
It will NOT work on multi-stage heat pump systems or
120/240 Volt systems. Call for help

Honeywell... | Answered on Dec 12, 2018 | 86 views


This took about 10 seconds to find,
To purchase a new replacement Heating Bulb, please contact our
consumer relations group at 1-800-477-0457 for cost and shipping detail see page 2 of your instructions that came with unit.. You can also look on line for hz940 parts.
https://www.manualslib.com/manual/1259650/Honeywell-Hz-940-Series.html?page=2#manual

Honeywell... | Answered on Dec 11, 2018 | 102 views


The Honeywell RTH230B indicates that the system is running the overnight (sleep) program with the 4 inside the house symbol. When the house flashes, the desired temperature has been changed from that programmed temperature (bypass mode). The bypass mode should only run for 2 hours.

The default programming starts the sleep period at 10 P.M. and ends at 6 A.M. On the original program in the thermostat, the temperature target was set to 62 during the heating season and 82 for the air conditioning season.

Since the thermostat was set to bypass, you should check who in your house pressed the Up/Down buttons on the thermostat to change the house temperature. Beyond that, check the start and end times and the programmed temperatures for each scheduled period. Honeywell has the manual for the RTH230B here: https://customer.honeywell.com/resources/techlit/TechLitDocuments/69-0000s/69-1800.pdf .

I hope this helps

Cindy Wells
(On my own programmable thermostat, we recently found that one period in the week had been left at the default setting. Thus the thermostat was programmed to maintain 60 degrees when we wanted 65 during the day.)

Honeywell... | Answered on Dec 10, 2018 | 119 views


That clicking is actually high voltage arcing in the unit. If the mesh is out of alignment or dirty it will arc.

Honeywell... | Answered on Nov 28, 2018 | 70 views


Do you mean the alert flag (a triangle with an exclamation inside it) or a different symbol? The Alert flag will appear with another message on the screen. If it is time to replace the battery, you'll also see "BATT" to the left of the flag and a low battery icon somewhere along the top of the LCD screen. If the thermostat is set to alert you to change the HVAC system filter regularly, you'll see "REPL" to the left of the alert flag.

This is from the T4 Pro thermostat manual on pages 6 and 7. See https://forwardthinking.honeywellhome.com/assets/tseries/resources/install/T4%20Pro%20User%20Guide%20-%2033-00188EFS.pdf . The T6 Pro uses the same alert behavior.

I hope this helps.

Cindy Wells

Honeywell... | Answered on Nov 18, 2018 | 7,626 views


check for shipping packaging around tray

Honeywell... | Answered on Nov 15, 2018 | 53 views


return it for a new one or refund. If you open it or try to repair you will void warranty.

Honeywell... | Answered on Nov 14, 2018 | 47 views


You may or may not have the correct thermostat. You did state if you have heating and cooling. this a heat only.


https://www.honeywellstore.com/store/images/pdf/ct31a1003e-heat-and-cool-non-programmable-thermostat-operating-manual.pdf

Honeywell... | Answered on Nov 13, 2018 | 218 views

Not finding what you are looking for?
Honeywell L4064B2236 Fan/Limit Control Heater Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Paul Carew

Level 3 Expert

3527 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Sean

Level 2 Expert

80 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...