Power Acoustik PTID-8960 Car Video Player - Page 8 - Answered Questions & Fixed issues


12-18-2019
I own a 2009 DODGE JOURNEY with a 6 DISC CHANGER - HARD DISC DRIVE (which is also a panel holding the Bluetooth, GPS, Time, Set-up, and Radio controls) that STOPPED READING DISCS two months ago. I have taken immaculate care of every aspect of this vehicle.

The problem is not dirty, scratched, or damaged DISCS.
The problem is not DISCS jammed in there.
I have long-since emptied it.

The problem is it won't read the DISCS.

Any suggestions? I'm looking for a used assembly/unit of the same thing to replace it with. But, I'd rather just have it fixed or just work. Everything else works fine. Just not the DISC player in any way whatsoever.

Any suggestions, links, etcetera would be much appreciated.

Thank you! : )

Car Audio &... | Answered on Dec 20, 2019 | 1,862 views


Hold the track button to the right for 10 sec. and it will auto enter it self, get the code. Then go to the ID code menu and enter a new one.

Good luck and let me know!!

Car Audio &... | Answered on Dec 08, 2019 | 172 views


Removal of the player is the first step. Now, you have to disassemble it sufficiently to get the errant disc back into the magazine. You will want to remove the magazine after the disc has been returned to check for damaged parts. Otherwise, the problem will happen again.

Car Audio &... | Answered on Nov 30, 2019 | 65 views


The most common issue I had is ground wires, I would also suggest changing it as quickly as possible. The other problem I had is adjusting a GPS navigator for my motorcycle. For this I would recommend checking this page https://yourmotobro.com/best-motorcycle-gps/ because some models require more than just adjusting a pair of screws on handlebars.

Car Audio &... | Answered on Nov 28, 2019 | 201 views


Neither can we. Can you please give us more detail about what it is that you received, and in what context?\

Car Audio &... | Answered on Nov 27, 2019 | 86 views


Good question. Can you tell us in more detail what you are asking about? The device, make and model, and what you are trying to do?

Otherwise there are dozens of different meanings of PSM
https://www.fdot.gov/environment/psmcodes.shtm
https://www.ibm.com/support/knowledgecenter/en/SSWRCJ_4.1.0/com.ibm.safos.doc_4.1/InstallPlan/Configurestep_installvmpsm.html

https://en.wikipedia.org/wiki/PSM

Car Audio &... | Answered on Nov 27, 2019 | 83 views


There is a reset button on face or behind detachable that requires a pin point to press 90% of the time this is a fix

Car Audio &... | Answered on Nov 22, 2019 | 242 views


The Q factor does have to do with tones and pitches of your music. This determines a Quality factor of how pitches are placed (high tones, low tones, and mid tones) and using the Q factor will use a preset setting to put the tones at a high proformance audio.

Simple test and trick for you.

  1. Put in your favorite cd.
  2. Turn on the Q factor
  3. Play a song and listen to it for atleast 45 seconds
  4. turn off the Q factot
  5. Play that same song for atleast 45 seconds
  6. Now you determine if the quality used by the Q factor is better or worse

For some songs that have close pitch audio, it may not be as noticeable, so you can repeat and test. Give it a try, because then you can understand it more by hearing then reading. Its all about how you want it to sound. Good luck

Thank You

Car Audio &... | Answered on Nov 14, 2019 | 8,003 views


You need to press refresh to see your answer posted :>) You had three posts, I deleted one of them.

You can't do that! The headlights on a car draw too much current to use a toggle switch. You will burn it out a less than a week. Headlights need a switch and a relay. Fix what you have, don't try new hacks.
Posted on Nov 07, 2019

Car Audio &... | Answered on Nov 07, 2019 | 75 views


You can't do that! The headlights on a car draw too much current to use a toggle switch. You will burn it out a less than a week. Headlights need a switch and a relay. Fix what you have, don't try new hacks.

Car Audio &... | Answered on Nov 07, 2019 | 80 views


Please use a hot air soldering gun to remove them.

Car Audio &... | Answered on Nov 05, 2019 | 138 views


yellow
red
black

Car Audio &... | Answered on Nov 05, 2019 | 108 views


you need to get a frequency converter install to make it work

Car Audio &... | Answered on Nov 05, 2019 | 100 views


yellow- constant
red -accessory
blk-ground
blue/yellow-steering volume
solid blue- power antenna
blue/white-power contd;
orange/white-illumination
lightgree-parking brake
purple/white-back up camera

positive speakers wires are'''
white-left front
gray-right front
green-left rear
purple-right rear

negative speaker wires are'
white/blk-left front
gray/blk-right front
green/blk-left rear
purple/blk-right reat

Car Audio &... | Answered on Nov 05, 2019 | 106 views


try and purchase a frequency converter and have it install

Car Audio &... | Answered on Nov 05, 2019 | 200 views

Not finding what you are looking for?
Power Acoustik PTID-8960 Car Video Player Logo

Popular Tags

20 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Professor_V
Professor_V

Level 2 Expert

93 Answers

The Knight
The Knight

Level 3 Expert

76352 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...