20 Most Recent Haier ESD210 / ESD211 Built-in Dishwasher - Page 2 Questions & Answers

Contact the seller or Haier direct as it is still under warranty. Just for information, we are Fixya, we aren't Haier. https://www.haierappliances.com/support ..

First thing to try is a reset.. Unplug or turn it off at the breaker for 5 minutes. You can also try this but it's used to clear error codes.... Simultaneously press and hold Cycle Select and Start pads for 5 seconds. Press ANY button to complete the reset process. ... The unit will now be ready to use/function normally at this time.

With 30,000 9.4 out 10 reviews, they must be good! It won't be the element though, it will the thermistor or the thermostat that is failing. Some can be calibrated. It may also be a failed circulation fan on a fan assisted oven. Test the oven first with an oven thermometer. elements can be tested for resistance, but in my experience they work or they don't, they don't half work. https://fixpart.de/de/uber-uns ..

Hi I got the E6 error at the end of cycle and inside it was exceptionally hot and dry, no leak under DW, I put breaker off and error was persistent, it finally disappeared after a moment, I guess after temperature went down. If it happens again I'll update the topic.

How to Post A New job on Facebook Timeline Today I will train you a way to submit new activity on Facebook Timeline. And a way to do that, in How to Post New Job on facebook

Just wondering if you found the problem as ours has just started throwing the"E30" code

The float switch may be stuck.

Turn off circuit breaker and wait for some period . Then turn on check .Have a look on tech https://meethamango.com/

user manual https://www.manualslib.com/manual/548406/Haier-Hpn12xhm.html https://www.haierappliances.com/support/manuals

check out this site. they have the fuses and some videos on how to test and replace which will tell you where it is https://www.repairclinic.com/Shop-For-Parts/b198c44/Haier-Fuse-Thermal-Fuse-Breaker-Parts

OK. When you see water on the floor, and you open the door, is there any water rising in the wash chamber and breaching the seal? If you open the door and do not see any water other than the water dripping off the dishes or whatever, I would suspect there's a leak underneath. If you see water standing in there, they you will want to clean the food/debris trap. Refer to your manual, if you have one. If the food trap is cleared and the water is still comin out, I would suspect a leak underneath the unit, possibly a loose water hose or drain hose.

Sounds like the dishwasher control panel has failed.

This is most likely an issue with the control panel.

https://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Visit this site to get some details.

call for a service check under warranty