20 Most Recent Bosch Nexxt 300 Series WFMC2201UC - Page 3 Questions & Answers

Best chance is to shut off. Pull the wall plug off, wait ten minutes and start over- hoping for a reset.

have a look at the door latch first see if it is not loose or of line then check the door lock

have a look at the door pin if ok check the door lock

check your filter then remove plug check motor brushes

Check hot water hose / valve filter. Check hot water inlet valve with multimetre.

The controller unit that tells the other parts what to do during cycles has failed for all the cycles except the one that works. You could replace the controller, but its an expensive part. I would buy another machine instead.

check the water valve it may need to be changed