Ariston Technologies AW129NA 16 Lbs Front Load Washer - Page 7 - Answered Questions & Fixed issues
Need a english manual
Okay, I looked for a while to find you a manual, but of course there isn't one in English. Here is what you can do though...
1. Locate your manual at the following website:
http://homeappliance.manualsonline.com/manuals/mfg/singer/
singer_product_list.html?s=gg314159
2. Use this website to translate the manual from Italian to English
http://babelfish.yahoo.com/
I Hope this helps :)
9/17/2009 4:00:04 PM •
Ariston...
•
Answered
on Sep 17, 2009
•
2,573 views
Fault code stopping washer from working
My washing machine will not spin and in fact turn around at all, i did a wash earlier and it was making a funny noise...like some thing was caught in the drum. It is about 3 years old....It does still fill with water thou!
5/24/2009 9:46:51 PM •
Ariston...
•
Answered
on May 24, 2009
•
365 views
Washing machine wont spin
Maybe something is physically preventing the drum from spinning, causing the motor protection to kick in and stopping the machine.
I'd check this out as a first step before calling a repair man:
1) unplug the machine from mains
2) make room between the rubber gasket and the drum for your hand/arm to reach down into the bowels of the machine, in the compartment between the drum and the bowl (or whatever you call it). If you find something strange there, remove it.
I've done this on occasion and have found lots of obstructing objects that don't belong there. Most notably hardware from underwire bras I might add... :)
It is worth a try.
Good luck!
5/21/2009 9:52:55 PM •
Ariston...
•
Answered
on May 21, 2009
•
190 views
Flashing lights
HI, this is a control fault that may be corrected by unplugging or shutting down the breaker switch for about five minutes. this will reset the microcomputer to its original state. after the five minute reset, plug or switch the machine on and observe the results.
If the unit is still blinking and the unit is not operational, this will confirm a major control fault and you will need to replace the control board(microcomputer/timer control)
5/18/2009 3:05:13 PM •
Ariston...
•
Answered
on May 18, 2009
•
608 views
My top loader Hisense washing machine doesn't wash but it spins, what is the possible solution?
If your Hisense top-loading washing machine is not washing but can spin out the water, it could be caused by a few different issues. Here are a few things you can try to fix the problem:
- Check to ensure that the washing machine is properly loaded and balanced. An unbalanced load can cause the machine to stop working or not wash properly.
- Check the water supply to the machine. Make sure that the water hoses are properly connected and that the water supply is turned on.
- Check the detergent dispenser to make sure that it is not clogged. A clogged dispenser can prevent the detergent from being dispensed and the machine from washing properly.
- Check the lid switch. If the lid switch is faulty, the machine may not wash but will spin out the water.
- Check the water level switch. If the water level switch is faulty, the machine may not wash properly but will spin out the water.
- If the problem persists, consider contacting Hisense customer service or a technician for further assistance.
It's essential to note that if the machine is not washing but it can spin out the water, it could be caused by a malfunction or damage in the water level switch, the timer or even the motor.
Gorenje washing, why does it stop with 1 left ?
Your NOT suppose to "Program anything". Machines are kinda like people. After they work, they need "some" time to rest. Your machine (And Mine) all do this. Next time leave it alone, the minute will count down and it will automatically shut off. Question? You actually stood by the machine and watched the entire cycle? Was there another problem that motivated you to do this? Like your clothes were still wet or water still in the tub? If you need further help, reach me via phone at
https://www.6ya.com/expert/steven_b77d19396bfe2249
3/18/2024 6:54:27 AM •
Washing Machines
•
Answered
on Mar 18, 2024
•
1,152 views
I want to bypass lid lock
It would be innapropriate to recomend the removal of a safety device.
I would repair it, not remove it.
Why does my water won't stop filling?
A few possible causes:
Blocked Water Level Switch: Most top-loading washing machines utilize a pressure switch to tell the water when to shut off during a wash or rinse cycle. If the tube becomes blocked with minerals from hard water or if the switch itself goes bad, the water will never shut off.
Bad Water Valve: Valves at the points where the hot and cold water hoses enter your washing machine control the flow of water into the machine. If these valves become stuck open, or if their seals become lost or compromised, the water will continue to flow into the machine.
Faulty Controls: The controls might fail to acknowledge the input from the pressure switch and never advance from one cycle to another. In some cases, this is a voltage problem, while in other cases the controls themselves are bad and would need to be replaced.
If you've already cleaned and cut the ends of the tube going to the level sensor and the issue persists, it might be best to consult with a professional appliance repair service. They can help diagnose and fix the problem accurately. Please remember to turn off the water supply and unplug the machine before attempting any repairs.
Error code in JCB 437 loader Q0195 any have a clue?
on a loader its most often fluids or leaky compresion
masters or slaves or the distribution
and or it need bleed or and filled etc {not easy}
you need a tech it needs a fluids check
could be just a bad filter...
Not finding what you are looking for?