Ariston... | Posted on Jan 20, 2013 | Be the first to answer
It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.
Ariston... | Answered on Jan 18, 2013
Ariston... | Posted on Dec 23, 2012 | Be the first to answer
Ariston... | Posted on Dec 19, 2012 | Be the first to answer
Ariston... | Posted on Dec 10, 2012 | Be the first to answer
Ariston... | Posted on Nov 28, 2012 | Be the first to answer
Ariston... | Posted on Nov 25, 2012 | Be the first to answer
Ariston... | Answered on Nov 21, 2012
Ariston... | Posted on Nov 21, 2012 | Be the first to answer
Ariston... | Answered on Nov 21, 2012
Ariston... | Posted on Nov 08, 2012 | Be the first to answer
Ariston... | Posted on Nov 06, 2012 | Be the first to answer
Ariston... | Answered on Nov 01, 2012
Ariston... | Posted on Oct 28, 2012 | Be the first to answer
Ariston... | Posted on Oct 26, 2012 | Be the first to answer
Ariston... | Posted on Oct 18, 2012 | Be the first to answer
Ariston... | Posted on Oct 04, 2012 | Be the first to answer
23 questions posted
Usually answered in minutes!
139 Questions
51 Questions
40 Questions
42 Questions
24 Questions
