20 Most Recent Ariston Technologies AW129NA 16 Lbs Front Load Washer - Page 5 Questions & Answers

You'll find these on line, just type the model number into google.Make sure to use the manufacturer's site, not a proxy.

Machine start normally but after some time it display H20 and stop. When i switch off the power it restart but again after few minutes it is same. Kindly help.

You need to check to see if the water is getting hot, because if it is not, then it will not move on.
You will find the heater element located at bottom rear of drum.
Remove rear cover to access it. To be certain if it is o/k or not, you need to test it with a meter.
Set meter to the ohms or continuity range, and you should get full scale deflection of meter, no reading, then heater faulty.
If heater o/k then could be faulty programmer

Please leave your comments as to wether my suggestion provided you with right solution
Thankyou.

check drive belt on motor is not broken

take the top off,remove the soap bucket,take the screws off on the pc board/front cover. the top screws of the front pannel are usualy behind the display cover. the botom screws are behind the bottom plastic cover which you have to prey off with a screwdriver from the top side.