20 Most Recent Ariston Technologies AW129NA 16 Lbs Front Load Washer - Page 4 Questions & Answers


bearings gone

Ariston... | Answered on Apr 16, 2015


inner and outer drum has to b removed replace the bearing kit 2 bearings one oil seal as kit

Ariston... | Answered on Apr 16, 2015


should b some slack on motor loosen bolt with elonggated slot

Ariston... | Answered on Apr 16, 2015


Most common causes of noisy spin are something has found its way between the drum and its casing or the heater has come adrift from its fixing and is rubbing on the drum

Ariston... | Answered on Mar 31, 2015


maybe a under wire from bras stuck in drum.when machine is empty look in drum holes and see if anything is poking through the holes.keeping turning the drum as you look,sometimes hard too spot has the tips are often white.

Ariston... | Answered on Mar 31, 2015


h2o is the chemical symbol for water. But if the water keeps running and does not stop, even when the machine is full it could be the machine has a defect level indicator, or the water lock does not work. When the lock even don't closes what you remove the power the lock is defect.

Ariston... | Answered on Mar 24, 2015


call a repair tech? Fix it? What is the question?

Ariston... | Answered on Mar 05, 2015


HI Mostafa.
Try this link.

Search: Aml85 - view online ' e-Manual.eu

Good Luck
Nomess

Ariston... | Answered on Jan 10, 2015


There is no fuse in the machine. The fuse is in the electrical panel of your home. If there is power in the outlet then the fuse is not tripped. If there is no power reset the circuit breaker or (very old) replace the fuse. Here is the link to the manual for the machine.
http://www.aristonappliances.us/_pdf/manuals/ASL75_CXS_MANUAL.pdf

Ariston... | Answered on Jan 03, 2015


Either the knob or the switch is faulty. Can you pull the knob off and see if you can set the program with pliers on the shaft?

Ariston... | Answered on Dec 05, 2014


F13. NTC (Dryer Temp) Open / Short
Check wiring continuity to Control Board.
Replace NTC.
Or, replace Control Board

NTC is the temperature sensor

Ariston... | Answered on Nov 15, 2014


sounds like the pump could be unable to get the water out after the wash. check the door into the pump, at the bottom front of your machine

Ariston... | Answered on Aug 12, 2014


You'll find these on line, just type the model number into google.Make sure to use the manufacturer's site, not a proxy.

Ariston... | Answered on Jul 23, 2014

Not finding what you are looking for?
Ariston Technologies AW129NA 16 Lbs Front Load Washer Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Harrie

Level 3 Expert

6746 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ariston Technologies Washing Machines

  • Ariston Technologies Washing Machines

Most Popular Question

washing machine door will not open

  • Washing Machines
Loading...