20 Most Recent Sabrent USB 2.0 NT-USB20 Ethernet Adapter - Page 2 Questions & Answers

Plug it into a USB port and it should be seen by Explorer and listed as an external drive.

Not knowing which product you need a driver for, I recommend going to there website and click on support; https://www.sabrent.com/support/ this will assist you with most questions you have.

Usually you can follow the 30:30:30 rule. Turn off and hold the reset 30 seconds, then still holding the reset turn on and wait 30 seconds more, release and the unit will reboot in 30 seconds.

Your floppy disk drive may be defective. Also, Some floppy drives are manufactured differently. Your best bet is to find another floppy drive to read your floppy disk. You can try to take it to the nearest computer store and ask them to read it for you. If they can read it at the computer store? The Sabrent drive you received if bad. If they cannot read it the floppy is bad. If the floppy is bad you can try to download free data recovery software to attempt to recover your data, files etc. Good luck

The floppy disc drive doesn't show under "computer" in the left hand column, but I've found that by clicking on "computer" it's listed in the main window. From the "Microsoft Community"

Try doing a direct LAN connection ( a cable) between your PC and your router instead of wifi. Does that keep an internet connection? if so check the antenna on the adapter is firmly connected and pointing upward, and less than 15 metres from your router.