Bravetti EP4305FS Deep Fryer - Answered Questions & Fixed issues


double sided tape thin type that should hole in place clean both sides, if some one trips it still comes out easy.

Bravetti... • Answered on Jun 28, 2017 • 158 views


I wont try it, the beast way to clean glass is to use a oven cleaner than wash it real good with dish soap!

Bravetti... • Answered on Dec 29, 2013 • 119 views


In the back of the unit there is a recessed reset switch(red) Depress it until it clicks.

Bravetti... • Answered on May 21, 2013 • 1,003 views


Recessed reset switch on back of unit. Depress until it clicks.

Bravetti... • Answered on Jan 23, 2013 • 455 views


element should be replaced

Bravetti... • Answered on May 02, 2010 • 279 views


Euro-pro.com for parts and manuals.

Bravetti... • Answered on Jul 04, 2009 • 311 views


New cords can be bought from
Euro-pro.com

Bravetti... • Answered on Jul 04, 2009 • 497 views


i called 1800-798-7398 mine is the 5liter fryer, and he needed the model number and date number on the back of the unit *difficult to see/ black plastic, but once I told him what this info was, service tech advised me to push a reset. It looks like a hole where a screw would be .. but I did as he suggested took a pen, pushed it in the hole * i could see no screw in the hole.. and when I plugged it in, turned it on, it started to heat up right away! Hope this is helpful for you! Call the number, Mine was a gift too, I had no receipt. He also wanted to know where it may have been purchased. I knew mine was from canadian tire. All is good. Call the number with model, and age date on hand.. and i am sure they will help you out too. They gave me an account number for refrence if i have any further questions/probs.

Bravetti... • Answered on Jun 11, 2009 • 337 views


replace switch

Bravetti... • Answered on May 08, 2009 • 76 views


I have Bravetti Platinum Pro Deep Fryer model EP65 but my heating element was damaged, I debating to sell parts or try to find a new heating element.

Bravetti... • Answered on Dec 15, 2008 • 549 views


he product has been recalled in canada you can find more information on the government health and safety website here:
http://www.healthycanadians.ca/pr-rp/recall-retrait_e.php?langCd=eng&searchTyp=1&re_id=466&searchstring=&searchyear=2008&searchcategory=&StartIndex=1

Bravetti... • Answered on Feb 02, 2009 • 202 views


Hey guys I fixed my problem...yay. All I did was to push a red button which I beleive is a resset button on the back of the on/off button part. It ain't visible but if you look in the holes of the screws that hold this part together (they are far down in the hole) one of them hides a small red button. Push it down with a toothpick or anything small enough to fit the hole and you're done. Plug it back and it works.

Bravetti... • Answered on May 21, 2013 • 1,756 views


have you tried taking out all of the oil and washing it realy good I know that mine wasnt working and thats what i did and it started heating up again

Bravetti... • Answered on Dec 02, 2008 • 455 views


Fryers draw high amps.Goto home depot,lowes and buy a 15amp 125 volt plug.Cut the exsisting plug off the cord,strip the cord down 2 inches you will see 3 wires black,white,green, connect the green wire to the green screw on the plug.connect the other 2 wires on either of the remaining spades(it doesnt matter).let me know

Bravetti... • Answered on Sep 07, 2011 • 2,969 views


Try pressing the reset button.

There are some reviewers with similar problems on this page:-

http://stuff.silverorange.com/archives/2004/may/bravetti

Bravetti... • Answered on May 14, 2008 • 328 views


Hello, Debi - I have not yet found replacement knobs specifically for your Bravetti roaster model. Bravetti was made by Euro-Pro, but it seems no products with the Bravetti trademark have been manufactured since around 2010. I did find some appliance replacement knobs, which MAY or MAY NOT work for your roasters. See: (TinyURL link) https://tinyurl.com/y8av5hpy Read the description of the knobs and what they may fit. Scroll down that page to find a list of stores / websites selling the knobs. Best wishes.

Bravetti Kitchen... • Answered on Jan 02, 2019 • 50 views


Methinks YOU are going to have TWO problems! The two screws shown are quite 'special' and you will need special BITS to remove them! kettle-base2-zxcl2y2mkzs0ieqkso4hopbi-2-0.jpg Bravetti EK109B kettle Google Search But check THIS out! 33 Pc Security Bit Set ($7) bits-zxcl2y2mkzs0ieqkso4hopbi-2-2.jpg And if THAT is not enough, see THIS! ($10 and a MUCH better buy ~ AND you could be the envy of all men on your block!) 100-zxcl2y2mkzs0ieqkso4hopbi-2-5.jpg 100 Pc Security Bit Set with Case PERFECT if you need to modify your Cable Box!! (just kidding) Anthony PS eBay has them too but BE SURE it is a USA seller or you MAY be waiting from that slow boat from China!

Bravetti Kitchen... • Answered on Apr 04, 2018 • 122 views


No, you have a problem with the unit, I would contact a local appliance repair company and have it checked.

Bravetti Kitchen... • Answered on Dec 20, 2017 • 58 views


Try Repairclinic.com most appliances have common cords and handles ...

Bravetti Kitchen... • Answered on Nov 14, 2017 • 338 views

Not finding what you are looking for?
Bravetti EP4305FS Deep Fryer Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Bravetti Kitchen Appliances - Others Experts

Mike

Level 3 Expert

4376 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

38007 Answers

ray gallant

Level 3 Expert

72218 Answers

Are you a Bravetti Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...