20 Most Recent Amana NAV5800A Top Load Washer - Page 8 Questions & Answers

I bought mine from circuit city in 1994 or 1995

Does the lid lock? Also Could be the motor. Also could be the actuator that shifts transmission from agitate to spin. Also could be belt issue. Or maybe something wedged between inner and outer tubs. Call a professional unless you’re comfortable with checking all this out.

Check lid lock

Try moving the selector knob to a different setting. If it doesn't work on another setting, it is most likely the controller itself.

could be a bad timer

What is model #?

Most likely defective water valve or tubing between pressure switch and tub is obstructed or has come off.

If you are doing diagnostics correctly and start button is unresponsive, control board is most likely the problem

3.2 cubic feet.

Bad main control board.

Sounds like the motor control relay had the contacts fused closed. This would most likely lock out the the other functions.

Most likely a control board problem if no lights at all are on.

Sounds like the load size switch on the control panel is not contacting any position except the small load. Replace the switch.

A similar inquiry has been previously posted, Hopefully one of the responses will relate directly to your low agitator speed problem - Amana washer LWA50AW

https://owners.amana.com/answers/issue-oven-door-wont-unlock/ https://www.youtube.com/watch?v=320yZMp34oA https://www.youtube.com/watch?v=XYeb9J09BVU https://www.youtube.com/watch?v=8M-jlru9MoU

https://producthelp.whirlpool.com/Troubleshooting_Guides/Troubleshooting_for_Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F5_E3_Error_code_for_top_load_washers