20 Most Recent Whirlpool Cabrio WTW6600SBT Top Load Washer - Page 4 Questions & Answers

You need to look on the bottom to determine where it is coming from, pump, hoses, bottom of tub. Here is a diagram and parts list to help you identify the part. http://www.appliancepartspros.com/pump-parts-for-whirlpool-wtw6600sb0.html

Here are some techniques whirlpool cabrio lid lock bypass YouTube

Sounds like the main tub bearing is going Parts for Whirlpool WTW7600XW2 Motor Basket and Tub Parts

Move the tub by hand in all directions and see if it is equally as hard and also it should return to the center with some force. if not you may have a broken support Parts for Whirlpool WTW6600SW2 Top and Cabinet Parts

Try turning the water more open or more closed in your house

Cabrio Start Button Repair

Cabrio's do leave a little water in the drum, if you wash everyday you wont smell it but if you wash once a week you will.

Yes, that could make the noise, you would have to remove the agitator and spin drum to get to the coins

If you push the tub to any side it should not be real easy and come back to the center with some force. If the above is good you shouldn't need springs. make sure that you load it evenly

uneven load, Try putting your laundry in more evenly

Try putting your laundry in more evenly

Check to see if there is water on the floor , I had similar problem I traced it to my tub leaking onto the shifter which gave me false codes going off

Make sure you use liquid soap with HE on it And you can buy a cleaner to wash your washer on a regular wash cycle

No its linked to the main board. Well if you were an Electrical PLC engineer, maybe

yes my wife does it all the time

It sounds like your inlet vales are leaking. They are located on the top. Parts for Whirlpool WTW6600SW2 Control Panel Parts

Attached is a video on removeing the tub https://youtu.be/6QOxVodC59Y

You most likely need a new tub seal, but check your hoses and pump first http://www.appliancepartspros.com/motor-basket-tub-parts-for-whirlpool-wtw7600xw2.html