20 Most Recent Tappan 30IN ELEC IGNa Oven - Page 6 Questions & Answers


Sounds like it could be a bad Hot Surface Igniter, Check to see if you see glowing, if not, have the Igniter replaced.

Tappan Ovens | Answered on Dec 06, 2013


Gas or electric

Tappan Ovens | Answered on Dec 02, 2013


read owners manuel. no manuel? call store that sells these stoves.

Tappan Ovens | Answered on Apr 21, 2013


I am assuming that by F! you meant F1. If this is the case it is a generic fault code meaning that the EOC (electronic oven control) is bad and needs to be replaced. It can be caused by any number of different things or by absolutely nothing at all. Sometimes these computer boards sense errors that don't actually exist. I would suggest turning power off to the unit for at least 2 minutes to perform a soft reset on the control. This will clear any error codes that the computer has stored and will be restarting from scratch. Sometimes this can be enough to solve the problem. If the error code comes back after the unit is powered on then you will need to replace the EOC to fix the unit.

Tappan Ovens | Answered on Nov 15, 2012


Sometimes theres too much air in the line. A better connection from tank to stove may help, or your running low on propane. Try cleaning the burners with an old toothbrush removing built up sut. Your flame should burn blue, not yellow. Hope it helps!

Tappan Ovens | Answered on Sep 16, 2012

Not finding what you are looking for?
Tappan 30IN ELEC IGNa Oven Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top Tappan Ovens Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35824 Answers

Are you a Tappan Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tappan Ovens

  • Tappan Ovens

Most Popular Question

increase flame only goes half way

  • Ovens
Loading...