20 Most Recent Tappan 30IN ELEC IGNa Oven - Page 3 Questions & Answers


This is your oven temperature sensor on your Tappan Oven.
T
hese codes are designed to troubleshoot your appliances and prevent further electronic issues from happening to your unit.

It is a simple repair that you can repair yourself and you can save a ton of money, also!

Once this part has been replaced, you oven should close properly and work just fine.

Tappan 30IN ELEC... | Answered on Apr 03, 2010


What year is the oven made?

Could be a defective gas safety value. Check the ignitor with a meter and see if it is open or shorted. Open = replace ignitor, if its shorted you are looking at a new valve.

Could also be a plugged orifice, this would require dis assembly of the valve.

Hope this helps,

Kevin

Tappan 30IN ELEC... | Answered on Feb 09, 2010


is the broiler 120 volts, if it is you could be losing a phase, or your element may be bad

Tappan 30IN ELEC... | Answered on Jan 23, 2010


Outstanding question, ask the guys:

http://appliancejunk.com/forums/index.php?referredby=858
http://forum.appliancepartspros.com/
http://applianceguru.com/

I want to know myself.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Tappan 30IN ELEC... | Answered on Jan 02, 2010


http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5153992&diagram_id=1251523#d1251523
your looking for part number 67 on that part breakdown
it is the bake element and if you inspect it im sure you will find it cooked or broken
befor you actually order the part take the unit out
unplug it
and inspect your wire connections to both sides of the element

Tappan 30IN ELEC... | Answered on Oct 17, 2009


That is a bad gas valve. Need too change it out. The glow bar is working but the valve is not opening.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Tappan 30IN ELEC... | Answered on Sep 02, 2009


Check that one of the two hot wires is not losing power due to bad connection. This needs to be checked clear from the breaker to the terminal in the oven. Loss of one side of the 240 volts may still allow the clock to work as long as no other element is on.

OFTEN the connection of to the plug in the wall is bad... IT IS ALSO a fire hazard.

REMEMBER to turn off the breakers when working on this!

Tappan 30IN ELEC... | Answered on Aug 28, 2009


Make sure your getting power to 120V receptacle that oven is plugged into first, by testing receptacle with a lamp or something. Breaker may have tripped, but if clock & lamp in oven working, then power should be o.k. If all o.k. there, lift stove top & check all small wires for proper connections, and back to main module.

Tappan 30IN ELEC... | Answered on Aug 03, 2009


the cleaning light and the lock door light doesn't go on when I set them to self cleaning and lock the door what should I do

Tappan 30IN ELEC... | Answered on Jul 15, 2009


check to see if you hear a clicking noise when trying to light a burner. if not then you need to replace your spark module. very simple to install. just remeber your wires.

Tappan 30IN ELEC... | Answered on Jun 21, 2009


thermostat is not working and calling for oven
to turn on

Tappan 30IN ELEC... | Answered on Jun 12, 2009


Try this:  . See if the ignitor is in the direct path of the gas. If not move it slightly to be closer to that path. Maybe something his it and it is out of position. Gas + Glow(together) = Fire The other possibility is that somethng in in the path of the gas leading to the glow coil.

Tappan 30IN ELEC... | Answered on Feb 16, 2009


I have a Tappan double oven range. An older model #316065301

How do I operate the cleaning cycle? I set the start and stop times, Locked the door and switched to clean. The clean light comes on but it doesn't heat up much at all. Never locks. I have misplaced my instructions manual.

Any help would be appreciated.

Barbara
[email protected]

Tappan 30IN ELEC... | Answered on Feb 02, 2009


Something is stopping the gas flow. Turn off gas. Disconnect line from the stove have someone turn on and off the the gas just for a second.(make sure no flame in room). See if gas is available.If not it is the gas line leading into the house somewhere,not the stove.  Follow the piping to the first thng it comes to. Disconnect that line and see if it is open from there back to the connection. If you finally get to the valve,which I dont think you will . You will have to disassemble  or replace it. 

Tappan 30IN ELEC... | Answered on Jan 07, 2009


replace the ignitor

Tappan 30IN ELEC... | Answered on Dec 24, 2008


oven will not come on, where's electric ignitor.

Tappan 30IN ELEC... | Answered on Dec 17, 2008


do you see a flame or just getting red.sounds like a bad ignitor

Tappan 30IN ELEC... | Answered on Dec 08, 2008

Not finding what you are looking for?
Tappan 30IN ELEC IGNa Oven Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top Tappan Ovens Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35750 Answers

Are you a Tappan Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tappan Ovens

  • Tappan Ovens

Most Popular Question

increase flame only goes half way

  • Ovens
Loading...