20 Most Recent Polycom SoundStation - Page 2 Questions & Answers

Try adjusting the ringer volume, dial tone volume, and speaker volume. Make sure that the ringer type selection is not set to off. Also make sure that you are not bridging your call.

You can also use the Upgrade feature built into the phone to look for updates which may resolve your issue.

If this has only started happening recently, Restore the default settings and see if it resolves your issue.

what line have you connected to the polycom? you will need to connect a single line circuit line.

If you are talking about the plug that would go in to the wall jack, you can have them reapired or do it yourself. (requires a special tool {~5-10 bux or so} and the appropriate plugs.)

As long as the individual wires inside the cable are labeled, you should be able to get it repaired on your own.

The crimper tool and plugs can be found at most major hardware or electronics stores.

If this is a cable that completely detaches from the phone, you may want to just buy a new cable.

repeat you setup for all station you want to connect to it.

dont have yet

How can I add 3 other people on the conference call using a Polycom Soundstation?

Constant red means it is set and ready to record messages after x amount of rings. Flashing red means you have a message. Please always include the model number is such questions and I can find you a manual. Polycom has lots! https://www.google.com/search?q=Polycom+phone+manual ..