20 Most Recent
Samsung SF-565 Laser Fax - Page 2 Questions & Answers
My printer spoler is not working
Hi g k,Have you tried restarting the print spooler from services?Start the Print Spooler service from the Services console
- Click Start, click Run, type services.msc, and then click OK.
- Right-click the Print Spooler service, and then click Stop.
- Right-click the Print Spooler service, and then click Start.
Start the Print Spooler service at command prompt
- Click Start, click Run, type cmd, and then click OK.
- Type the following commands at the command prompt:
net stop spooler
net start spooler
exit
Note Press ENTER after each command line.
Hope this helps, and please rate:)Gary
I have a samsung SCX3400 and am operating MacOsX 13. the printer function is working just fine but I am struggling to find a download for the scanner.
Here's what you can try to get your scanner working:
- Samsung's Official Website: Visit Samsung's official website and navigate to the support or downloads section. Look for your specific printer model (SCX3400) and see if they have scanner drivers available for macOS 13. Samsung may have released updated drivers that are compatible with your operating system.
- Use Apple's Built-in Drivers: macOS typically includes built-in drivers for a wide range of printers and scanners. Sometimes, these built-in drivers can work with your printer's scanning function. To check if your printer is recognized, go to "System Preferences" > "Printers & Scanners" and see if your Samsung printer is listed there. If it's listed, try using the "Open Scanner" option to see if you can scan using the built-in driver.
- VueScan Software: VueScan is third-party scanning software that often provides compatibility with a wide range of scanners, including older models. You can try downloading and installing VueScan to see if it can recognize and work with your Samsung SCX3400 scanner.
- Check for Updates: Ensure that your macOS 13 is up to date. Sometimes, Apple releases updates that include improved compatibility with various devices, including printers and scanners.
- Contact Samsung Support: If none of the above methods work, you may want to contact Samsung's customer support for assistance. They might have specific recommendations or updated drivers available for your scanner on macOS 13.
- Consider Compatibility: If your printer is quite old, it's possible that Samsung may not provide updated drivers for macOS 13. In that case, you might need to consider upgrading your scanner or using it with a computer running an older, supported version of macOS.
Please help. I have a Samsung CLP-365 toner printer.
Suddenly won’t feed paper, I’ve changed the little rubber grip but realise now that the entire arm is not spinning. The little coggs at the end are not meeting the large spinning cog.
Is that the issue? How would that have happened? Any fixes?
Thank you
There are a few possible reasons why the arm is not spinning or engaging with the large cog:
- Gear Misalignment: The gears might have become misaligned, which is preventing the arm from rotating properly. This can happen due to wear and tear, or if the printer experienced any force or impact.
- Gear Damage: One or more of the gears may be damaged, causing the connection between the arm and the large cog to fail.
- Mechanical Issue: There could be a mechanical problem within the printer that is preventing the arm from moving correctly.
To troubleshoot and potentially fix the issue, follow these steps:
- Inspect Gears: Open up the printer cover and look for any visible signs of damage or misalignment in the gears. If you notice any issues, try to reposition or replace the affected gears.
- Lubrication: If the gears seem stiff or difficult to move, you can try applying a small amount of lubricant suitable for printers. Be cautious not to use excessive lubricant as it might attract dust and debris, causing more problems.
- Clean the Printer: Dust and debris can also cause issues with the printer's mechanism. Gently clean the interior of the printer, especially around the gears, with compressed air or a soft brush.
- Verify Components: Ensure that all printer components, including the arm, are securely in place and properly seated. If something is loose or out of alignment, try repositioning and securing it
Not finding what you are looking for?
